Kilz Kilz® Quick Dry Caulk No. Pc20
KILZ® QUICK DRY CAULK NO. PC20
KILZ® QUICK DRY CAULK NO. PC20
KILZ® Quick Dry is a high-quality interior and exterior acrylic caulk that prevents craze cracking, shiners (gloss change / discoloration of paint film), and is easily applied with consistent flow (no air pops).
This unique formula creates a watertight seal and provides excellent adhesion to most common surfaces. This product is instantly paintable with a sprayer, and can be brush/roll painted in 10 minutes.
INFORMATION
BRAND
Kilz
PRODUCT TYPE
Paint
COLLECTION
Kilz® Quick
ELONGATION AT BREAK
200%, DIN 53505 / ISO 868
BASE POLYMER
Siliconized Acrylic
COVERAGE
55 linear ft. at a 3/16" bead size
DENSITY
13.4 lb/gal
JOINT MOVEMENT
12.5%
ASTM
- Meets ASTM C920
- Class 12.5 Specifications
COLOR
White
FLASH POINT
> 199.9°F Closed Cup
DOWNLOADS
↓ SDS PC20
↓ Warranty
VOC
17.6 g/L
PACKAGING
10.1 oz.
CLEAN UP & DISPOSAL
Clean all tools and equipment with warm soapy water and rinse with warm clean water.
DETAIL
DRY TIME AT 77°F, 50% RH
Longer dry time required in cooler temperatures and in higher humidity.
- Full Cure : 2 weeks
- Water-Ready : 5 hours
- To Paint with Sprayer : Immediately
- To Paint with Brush/Roller : 10 minutes
- Shelf Life : 18 months, unopened and stored in a dry place between 40°F and 100°F
APPLICATION
-Using proper safety precautions, cut the spout or tip of the cartridge at a 45° angle to the desired bead size. Load the cartridge into a caulk gun and squeeze the bead of caulk into the desired location.
If the crack depth exceeds 3/8", use a backer rod material. Smooth the bead with a caulking tool or water and allow 10 minutes for caulk skin to form before painting with a brush/roller, or use a paint sprayer immediately. When finished be sure to remove and clean up all excess caulking material, and reseal cartridge for storage and reuse. -Application Temperature: 40°F – 100°F.
SURFACE PREPARATION & RECOMMENDED USES
Use for filling cracks or screw/nail holes in walls and ceilings of:
- Wood
- Plaster
- Gypsum
- Brickwork
- Concrete
- Other gaps and cracks prior to painting
The surface must be clean, dry, free of dust, chalk, oil, grease and all other loose materials. Use on properly prepared interior or exterior surfaces to seal connection joints such as:
-Trim -Vents -Pipes -Stairs -Siding -Skirtings
-Windowsills -Corner joints -Door Frames -Baseboards -Molding Siding -Baseboards -Molding Siding -Concrete/Brickwork -Window Frames (Wood and Metal)
LIFETIME LIMITED WARRANTY
LIFETIME LIMITED WARRANTY
Masterchem Industries Llc Warrants To You, The Original Residential Consumer Purchaser, That This Product Will Provide A Waterproof Finish And Hide Hairline Cracks Existing At The Time Of Original Product Application For So Long As You Reside In Your Home. This Warranty Is Not Valid When The Product Is Not Properly Applied To A Properly Prepared Surface Or Cared For In Accordance With The Label Directions.
This Warranty Excludes Water Intrusion Due To Structural Defects And/or Caulk Failure. Color Fading And Chalking Will Occur Naturally Over Time. This Warranty Is Not Transferable. If This Product Is Found Not To Perform As Specified On The Label During The Warranty Period, Masterchem Industries Llc Will, At Its Option And Upon Presentation Of Proof-of-purchase (The Original Receipt), Either Furnish An Equivalent Amount Of New Product Or Refund The Original Purchase Price Of This Product To You.
This warranty excludes (1) labor and costs of labor for the application or removal of any product, and (2) any incidental or consequential damages, whether based on breach of express or implied warranty, negligence, strict liability or any other legal theory. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Note to residents of the State of New Jersey: The provisions of this warranty, including its limitations, are intended to apply to the fullest extent permitted by the laws of the State of New Jersey.
CAUTIONS/LIMITATIONS
-Protect from freezing. -Reseal container for storage and reuse.-Not suitable for continuous exposure to water.-Shelf life under normal conditions is 12 months unopened. -For best results, apply at temperatures between 40°F – 90°F.
-Wash hands thoroughly after handling and before smoking and eating. -Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates. -Eye protection is recommended. Avoid contact with eyes. May cause eye, nose and throat irritation. -Exterior applications only when applied in dry weather, and applied caulk must stay dry for at least 5 hours after application. -Avoid breathing of dust, vapors or spray mist. Open windows and doors or use other means to ensure fresh air entry during application and drying. -If vapor/mist levels cause eye watering, headache, or dizziness, wear an appropriate, properly fitted respirator (NIOSH / MSHA TC 23C or equivalent).
