Kilz® 1 Standard Interior Primer Paints
KILZ® 1 STANDARD INTERIOR PRIMER PAINTS
KILZ® 1 STANDARD INTERIOR PRIMER PAINTS
KILZ® 1 STANDARD Water-Based Primer is designed for use on multiple interior surfaces helping save cost by reducing the number of coats of paint needed to achieve optimal results.
It seals porous surfaces, hides minor scuffs and marks and promotes a more uniform appearance of the topcoat.
It’s ready to brush, roll or spray and can be topcoated after one hour with latex or oil-based paint.
Use KILZ STANDARD Primer on almost all interior surfaces including wood, drywall, plaster, brick, masonry and more. Not recommended for flooring, glossy surfaces, mold and mildew prone surfaces or for stainblocking.
INFORMATION
MILS
- Mils Wet : 6.0, 4.0
- Mils Dry : 1.2, 0.8
BRAND
Kilz
PRODUCT TYPE
Paint
PRODUCTION
Made in USA
BASE
Water
COVERAGE
- Coverage - Low : 250 sq. ft.
- Coverage High : 400 sq. ft.
FINISH @ 85°
< 10.0
COLOR
White
VISCOSITY
90-100 KU
DRY TO TOUCH
30 min
APPLICATION
-Min Application Temp : 50°F (10°C)
-Max Application Temp : 90°F (32°C)
DRY TO RECOAT
1 hour
MAX TINT
2 oz
ROLLER
- Roller - Smooth : 3/8" - 1/2" nap
- Roller - Porous : 1/2" - 3/4" nap
VOC
<100 g/L
BRUSH
Nylon / Poly
SPRAY
- Spray Tip : .017" - .021"
- Spray Filter : 60 mesh
- Spray Pressure : 1,800 - 3,000
FLASHPOINT
N/A
SOLIDS
- Volume Solids : 20%
- Weight Solids : 35%
DETAILS
CLEAN-UP & DISPOSAL
-Clean equipment and paint spatters with warm, soapy water. If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. -Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.
DRY TIME AT 77°F (25°C), 50% RH
-Dries to the touch in 30 minutes. -Can be recoated or topcoated in one hour with latex or oil-based paint. -Low temperatures, high humidity or poor ventilation can significantly increase dry and paint application times.
SURFACE PREPARATION*
The following steps are recommended for product performance
-If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry.
-Glossy Surfaces : KILZ PREMIUM and KILZ 2® Primers are recommended for use over properly prepared glossy surfaces.
-Peeling or Checked Paint : Scrape off loose paint and sand to a smooth surface. Sanding or removal of paint containing lead is hazardous.*
-All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances.
-Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming. Note: KILZ PREMIUM, KILZ 2 and KILZ Kitchen & Bath Primers are recommended for mildew-prone surfaces.
-Masonry, Brick, Stucco and Plaster: KILZ STANDARD Primer may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ STANDARD Primer.
APPLICATION
-Apply using a brush, roller or sprayer.
-Brush – High quality Nylon/Polyester
-Airless spray – .017-.021 tip / 60 mesh filter
-Prime the entire surface to ensure a uniform appearance of the topcoat.
-Coverage : 300-400 sq. ft.(28-37 m2) per gallon depending on application method and surface porosity.
-Roller – High quality 3/8-1/2" nap on smooth surfaces or 1/2-3/4" nap on semi-rough or porous surfaces.
-Eye protection is recommended. For spray applications, a small amount of water (no more than ½ pint per gallon) may be added.
-Only apply if surface, air and product temperatures are between 50°-90°F (10°-32°C). Stir thoroughly before and occasionally during use.
-Stainblocking : Important - For stainblocking, use oil based primers such as KILZ ORIGINAL or water based primers such as KILZ PREMIUM.
-Tinting : KILZ STANDARD Primer may be tinted with up to 2 ounces of universal colorant per gallon. Tinting to a lighter shade than the topcoat is recommended.
