Vahallan Erosion Tile
EROSION WALL TILE
EROSION WALL TILE
The Erosion collection displays a highly textured combination of both geometric and organic forms. This handmade wallcovering features monochromatic layers, that result in in a style that is both modern and rustic.
INFORMATION
BRAND
Vahallan
PRODUCTION
Made in United States
PRODUCT TYPE
Wall Tile
COLLECTION
Erosion
REPEAT AND MATCH
No repeat. Random pattern match.
TILE SIZES SQUARES
29"x 29"
APPLICATION
Tiles
DOWNLOADS
↓ View Layout Options
↓ Installation Instructions
COLORS
INSTALLATION GUIDE FOR TILES
At Vahallan, we are meticulous about each hand-painted wall covering we create for our customers. Every order is crafted by our artists to give your space the personalized look and feel you’re seeking. Using unique designs, a detailed process, and intricately forged materials, Vahallan paper is proudly madein Lincoln, Nebraska —where artistry and craftsmanship meet.
COLORS
4
ENVIRONMENT
Indoor & Outdoor
PRE-INSTALLATION GUIDELINES
-The panels should be viewed and approved by client before installation. Confirm that you have the correct quantity and color of product. No claims will be allowed if more than 3 panels have been installed. All claims must be made within 30 days of ship date. -No claims are allowed for labor charges or consequential damages. No claims are allowed if lighting in install area is unfinished/not fully installed. -Our product is not guaranteed against fading or color changes over time. Prolonged storage is not recommended. -When handling wall coverings, avoid folding or creasing the product -Store the material in a dry place between 60° - 85°F.
CLEANING & CARE
-Avoid getting the wall covering excessively wet. -Most stains will wipe clean with water and a soft cloth. -Do not use cleaners, solvents, or chemicals on any kind on Vahallan wall coverings. -Before cleaning any product, we recommend testing it on a small, inconspicuous area.
APPLICATION
STEP 1: SETUP
Make sure the walls are dirt- and dust-free, and that cracks, nail holes, and loose plaster have been fixed. Remove any electrical outlet plates and vent covers. These can be covered by our wall covering and we recommend doing this prior to covering the walls.
STEP 3: WALL MAPPING
Wall mapping will be determined by the method of installation (Step 5) and the height of the wall. We recommend beginning installation in the approximate center of the wall.
STEP 2: WALL PREPARATION
Walls should be smooth and sanded. Surfaces receiving the wall covering should be primed with two coats of high-quality acrylic primer. Match primer color to paper to minimize visible seams on wall. Read the manufacturer’s label for suggested primer drying time.
STEP 4: ADHESIVE APPLICATION
Apply adhesive to the back of your prepared piece using a paint roller. It is important that the application is even and adequate, particularly at the edges. To ensure proper adhesion, book or allow paper to relax for 30-90 seconds after applying adhesive. On heavily textured papers or porous surfaced papers, avoid getting adhesive on the face of the wall covering as it could stain the papers. It may be necessary on heavily textured wallpapers to put adhesive on both the wall and back of paper.
STEP 5: PAPER APPLICATION
-Option 1: Measure the height of the tile and then subtract 1”. From the ceiling, measure that distance down and draw a level horizontal line. For example, if your tile is 29” tall, measure 28” down from the ceiling to draw your horizontal line. The first tile will be installed above that line. Trim excess paper at the ceiling for an exact finish. Proceed installing the tiles in columns. Thin edge strips may be unavoidable -Option 2: Avoid thin edge strips by carefully mapping wall so that the tiles will fit. Draw a level horizontal line on the wall at the starting point you’ve determined. Install the paper at that line in columns
