Kilz Kilz® Drywall Interior Primer & Sealer
KILZ® DRYWALL INTERIOR PRIMER & SEALER
KILZ® DRYWALL INTERIOR PRIMER & SEALER
KILZ® Drywall Primer & Sealer seals new uncoated drywall which helps achieve a uniform professional quality finish in less coats.
It dries fast (ready to paint over in 1 hour), easy to clean-up and ready to apply with standard applicators.
KILZ Drywall Primer prevents new drywall surface from absorbing too much paint.Helps achieve a uniform professional quality finish and evenly seals drywall to prevent flashing, making the topcoat more uniform.
INFORMATION
BRAND
Kilz
PRODUCT TYPE
Paint
INT/EXT
Interior
BASE
Water
APPLICATION TEMPERATURE
- Minimum : 50°F (10°C)
- Maximum : 90°F (32°C)
BRUSH
- Nylon
- Poly
COLOR
White
FINISH @ 85°
< 10
ROLLER
3/8" - 1/2" nap
VOC
<100 g/L
SPRAY PRESSURE
2.500 - 3.000
WEIGHT SOLIDS
27%
VOLUME SOLIDS
16%
DRY TIME @ 77°F (25°C), 50% RH
Longer dry time required in cooler temperatures and in higher humidity.
- To Touch: 30 minutes
- To Recoat: 1 hour
COVERAGE
- Low : 300 sq. ft.
- High : 400 sq. ft.
SPRAY FILTER
60 mesh
SPRAY TIP
.017" - .021"
CLEAN-UP & DISPOSAL
Use soap and water to clean hands, tools and spills. For recycling or disposal of empty containers and unused product, contact your household refuse collection service.
SURFACE PREPARATION
The following steps are recommended for product performance.
-Cover all nail and screw heads with joint compound according to directions and sand to smooth surface. -Tape drywall and apply joint compound and allow to fully cure according to directions prior to priming. -Sand to smooth surface before priming.. -Wipe off dust with a damp cloth, allow to dry thoroughly.
MILS (COVERAGE - LOW)300 sq. ft.
- Wet : 5.3
- Dry : 0.8
MILS (COVERAGE - HIGH)400 SQ. FT.
- Wet : 4
- Dry : 0.6
APPLICATIONS
IMPORTANT! Do not open can without reading instructions.
- Interior use only.
- Do not use on floors.
- Brush – High quality Nylon/Polyester.
- Roller – High quality 3/8-1/2" nap.
- For use on uncoated drywall only.
- Do not use over glossy surfaces.
- Do not topcoat with glossy paint finishes.
- Airless spray – Fluid Pressure .017-.021" tip / 60 mesh filter.
- Shelf life under normal conditions is two years unopened.
- Allow 2 weeks for full cure before washing or cleaning.
- Do not use when air and surface temperatures are below 50°F or above 90°F.
- Coverage: 300-400 sq. ft. (27.87-37 m2) per gallon depending on application method and surface
