Kilz Kilz 2® Gray Interior | Exterior Primer
Kilz 2® Gray Interior | Exterior Primer
KILZ 2® GRAY INTERIOR | EXTERIOR PRIMER
KILZ 2® GRAY Primer is a fast drying, water-based, multi-surface primer-sealer-stainblocker which is best used under dark, rich and deep vibrant color topcoats.
This helps achieve more accurate color with fewer coats of paint and also improves hiding of previous colors. KILZ 2 GRAY Primer has excellent adhesion, sealing properties and a very mild odor. Effectively blocks “light to medium” stains including water stains, rust, grease, ink, pencil and felt marker.
Use on interior and exterior surfaces including woodwork, drywall, plaster, paneling, masonry, brick, painted metal and properly prepared glossy surfaces†. Use under or over water-based or oil-based paints. Not recommended on flooring.
INFORMATION
BRAND
Kilz
PRODUCT TYPE
Paint
PRODUCTION
Made in USA
BASE
Water
APPLICATION TEMPERATURE
- Minimum : 50°F (10°C)
- Maximum : 90°F (32°C)
BRUSH
- Nylon
- Poly
COLOR
White
FINISH @ 85°
< 10
VISCOSITY
95 - 104 KU
MAX TINT
2 oz
DRY TO TOUCH
30 min
DRY TO RECOAT
1 hour
ROLLER
- Porous Surface : 3/8" - 1/2" nap
- Smooth Surface :1/2" - 3/4" nap
VOC
<50 g/L
SPRAY PRESSURE
2.500 - 3.200
WEIGHT SOLIDS
47.35%
VOLUME SOLIDS
33.64%
MATERIAL
If spilled, contain material and remove with an inert absorbent. Dispose of contaminated absorbent, container and unused product in accordance with all current federal, state and local regulations. For recycling or disposal information contact your local household refuse collection service.
DRY TIME @ 77°F (25°C), 50% RH
- Dries to the touch in 30 minutes.
- Can be recoated or topcoated in one hour with latex or oil-based paint.
- Application at lower temperatures, in high humidity or in poorly ventilated areas will affect dry time.
MILS (COVERAGE - LOW)
- Wet : 4
- Dry : 5.3
MILS (COVERAGE - HIGH)
- Wet : 4
- Dry : 1.3
CLEAN-UP & DISPOSAL
-Clean equipment and paint spatters with warm, soapy water. -Do not dispose of this product down a drain. Please consider donating any unused product. For recycling or disposal information contact your local household refuse collection service.
COVERAGE
- Low : 300 sq. ft.
- High : 400 sq. ft.
SPRAY FILTER
60 mesh
SPRAY TIP
.017" - .021"
SURFACE PREPARATION
-All surfaces must be clean, free of dust, chalk, oil, grease, wax, polish, mold and mildew, loose peeling paint, rust and all other foreign substances. -If washing is necessary, use a non-soapy detergent or a TSP substitute, rinse well and allow to dry. -Unpainted, exterior wood exposed to sun and/or moisture longer than 2-4 weeks must be cleaned and sanded before priming. -†Glossy Surfaces: For maximum adhesion, scuff sand the surface thoroughly before priming.*-Peeling or Checked Paint: Scrape off loose paint and sand to a smooth surface.* -Mold or Mildew Covered Surfaces: Wash the area with a mildew remover, rinse with water and allow to dry before priming.
Masonry, Brick, Stucco and Plaster: KILZ 2 GRAY Primer may be used on clean, dry, aged masonry surfaces. New masonry must be allowed to cure (dry) at least 30 days before applying KILZ 2 GRAY Primer. Fire Restoration: It is critical to clean damaged surfaces thoroughly before priming. Primer recommendations: Water-based primers such as KILZ® RESTORATION or oil-based primers such as KILZ® ORIGINAL (interior use) or KILZ® ORIGINAL EXTERIOR.
APPLICATIONS
- Brush – High quality Nylon/Polyester
- Airless spray – .015-.021 tip / 60 mesh filter
- Prime the entire surface to ensure a uniform appearance of the topcoat.
- Coverage: 300-400 sq. ft. (27.87-37 m²) per gallon depending on application method and surface porosity.
-Eye protection is recommended. For spray applications, a small amount of water (no more than 1/2 pint per gallon) may be added. Do not thin for stainblocking applications. Only apply if surface, air and product temperatures are between 50°-90°F (10°-32°C). Stir thoroughly before and occasionally during use.
-Stainblocking: KILZ 2 GRAY Primer is formulated to block light to medium stains. For heavy stains use oil-based primers such as KILZ® ORIGINAL and KILZ® ORIGINAL EXTERIOR or water-based primers such as KILZ MAX® and KILZ® PREMIUM. -Tinting: KILZ 2 GRAY primer may be tinted with up to 2 ounces of universal colorant per gallon. Tinting to a lighter shade than the topcoat is recommended. -Coverage: 300-400 sq. ft. (27.87-37 m²) per gallon depending on application method and surface porosity.
