Behr Behr Marquee® Interior Paints
BEHR MARQUEE® INTERIOR PAINTS
BEHR MARQUEE® INTERIOR PAINTS
Total Transformation In One Coat, Guaranteed
Love your space like never before with BEHR MARQUEE® Interior Paint.
information
BRAND
Behr
PRODUCT TYPE
Paint
SELECT FINISH
- Satin
- Eggshell
- Flat Matt
- Semi Gloss
- High Gloss Enamel
SIZE
- 8 oz
- 1 Quart
- 1 Gallon
- 5 Gallon
SHEENS
Exceptional Hide and Advanced Stain-Blocking
COAT
One-Coat Color Guarantee◆
COVERAGE PER GALLON
UP TO 400 Sq. Ft.
DETAIL
Its advanced formula gives you beauty, durability, and the time-saving convenience of guaranteed one-coat coverage, all in over 1,000 colors◆.
CLEAN-UP
Soap & Water
PROTECT
From Freezing
DRY TIME
1 HR Dry Time
2 HR Recoat Time
WHERE TO USE
Properly prepared coated interior surfaces. Ideal for every room.
DISPOSAL
For disposal of empty containers, unused paint and soiled rags, contact your household refuse collection service.
ALL SURFACES:
- Properly prepare and clean all surfaces. -Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry. Remove mildew stains with a mildew stain remover. -Scuff sand glossy surfaces and repair imperfections. -Remove all dust with a damp cloth, allow to dry. -Allow new stucco, plaster and masonry to cure for 30 days before painting. -Use BEHR MARQUEE paint as a primer for uncoated, porous or repaired interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar).
DURA
Superior Durability
PRIMER
Advanced Paint & Primer◊ Formula
STAINED SURFACES
-Lock in stains with BEHR MARQUEE as a spot primer. -For heavy stains, test for stain bleed-through by applying BEHR MARQUEE to a small section. -If the stain bleeds through, spot prime with another coat to the stained area and test again before topcoating. -If bleeding continues, a longer dry time is needed before topcoating.
APPLICATION
-Apply when air and surface temperatures are between 50-90°F (10-32°C). -Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity. -Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015 - .019" spray tip, 60 mesh filter). -Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon. -Fully saturate roller for best coverage. -Untinted bases and colors outside of the MARQUEE Interior One-Coat Color Collection may require more than one coat to achieve complete hide and a uniform finish. -Darker colors may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time. -After 2 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. -Dry paint film is mildew resistant. -Do not use on floors.
WHY CHOOSE BEHR MARQUEE?
ONE-COAT GUARANTEE◆
Enjoy the convenience of guaranteed one-coat hide in over 1,000 colors.
ADVANCED PAINT & PRIMER FORMULA
This high-performance paint provides adhesion and stain-blocking.
SUPERIOR DURABILITY
Life gets messy, but your walls don’t have to, with the stain-resistance and scrubbable, easy-clean finish of BEHR MARQUEE®.
