Behr Behr Ultra® Scuff Defense® Paint
BEHR ULTRA® SCUFF DEFENSE® PAINT
BEHR ULTRA® SCUFF DEFENSE® PAINT
Interior Paint That's Too Tough To Scuff
Don’t just paint your walls - protect them with BEHR ULTRA SCUFF DEFENSE Interior Paint.
information
BRAND
Behr
PRODUCT TYPE
Paint
SELECT FINISH
- Satin
- Eggshell
- Flat Matt
- Semi Gloss
- High Gloss Enamel
SIZE
- 8 oz
- 1 Quart
- 1 Gallon
- 5 Gallon
SHEENS
Scuff-Resistant Finish in Multiple Sheens
PRODUCTION
Made in USA
LOOK
Stays Looking New Longer® Finish
PAINT
Antimicrobial Mildew Resistant Paint Finish
STAIN
Stain-Blocking Paint and Primer*
AERA
Outstanding Durability for Busy High-Traffic Areas
CERTIFIED
Greenguard® Gold Certified**
COVERAGE PER GALLON
250-400 SQ. FT
DRY TIME
1 HR Dry Time
2 HR Recoat Time
CLEAN-UP
Soap & Water
PROTECT
from Freezing
WHERE TO USE
Properly prepared coated and uncoated Interior surfaces. Ideal for Family Rooms, Living Rooms, Dining Rooms, Bedrooms, Hallways and Ceilings.
PREPARATION & PRIME†
-All surfaces should be properly prepared and cleaned. Remove loose paint, wash off dirt and grease with detergent, rinse and allow to dry. -Remove mildew stains with a mildew stain remover. Scuff sand glossy surfaces and repair imperfections. Remove all dust with a damp cloth, allow to dry. -Allow new stucco, plaster, and masonry to cure for 30 days before painting. -Use BEHR ULTRA paint as a primer for properly prepared uncoated or painted interior surfaces, including woods that contain tannins (two primer coats required for redwood and cedar) and heavily stained areas. -Lock in stains with BEHR ULTRA as a spot primer. -For heavy stains, test for stain bleed-through by applying BEHR ULTRA as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before topcoating. If bleeding continues, longer dry time is needed before top coating. -For drastic color changes or when applying deep colors denoted with a dagger (†) on the color chip, apply a tinted primer coat of BEHR ULTRA if needed.
APPLICATION
-Apply when air and surface temperatures are between 50-90°F (10-32°C). -Stir paint occasionally. Intermix containers of same product to ensure color and sheen uniformity. -Use a high quality 3/8-1/2" nap roller cover, nylon/polyester brush or an airless sprayer (.015-.019" spray tip, 60 mesh filter). -Do not thin if using a roller or brush; however, if using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon. -Certain colors may require more than one coat for complete hide. -Darker colors may require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time. -After 4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent. Dry paint film is mildew resistant. -Do not use on floors.
WHY CHOOSE BEHR ULTRA SCUFF DEFENSE INTERIOR PAINT?
WHY CHOOSE BEHR ULTRA SCUFF DEFENSE INTERIOR PAINT?
This innovative paint formula yields a modern, clean look while providing advanced scuff and mar resistance against everyday wear and tear.
Advanced, antimicrobial-mildew protection makes this and
excellent choice for kitchens & baths.
This scrubbable, washable paint film
is ideal for busy households.
