Marley Antislip Plus Castellated Decking

ANTISLIP PLUS CASTELLATED DECKING 

AntiSlip decking boards has been specifically designed to provide a durable and effective anti-slip surface to minimise any risk of slipping - even in adverse weather.

PRODUCTION 

Made in United Kingdom

COLOR 

Pale green, almost clear that overtime fades to a warm honey colour, eventually turning silver grey.

INSTALLTION 

Marley recommends following the Timber Decking and Cladding Association guidelines. Marley’s antislip range is designed to be robust and hard wearing. Due to the durable nature of our antislip resin/aggregate insert we recommend following our instructions when cutting our antislip deck boards.

-Use a hand or mechanical timber saw to cut the remaining timber. -At the required point of cutting; mark a straight line across the boards. -Use a 125mm angle grinder, with either a 3 or 5mm thick cutting disc (stone or steel work equally the same) to cut through the resin/aggregate insert. -Any exposed surfaces should be given two liberal coats of a brush on end grain preservative, this includes cross cutting, notches and drill holes. This will maintain the integrity of the protection. Our recommended product is Protim Water Based end coat which is available in 1 litre tins.

TECHNICAL DETAIL

PROFILE 

The castellated AntiSlip Plus® timber deck board has a more traditionally grooved profile, creating a dynamic interplay between light and texture. A smooth profile is also available.

BENEFITS OF ANTISLIP PLUS® 

-AntiSlip Plus^® Decking uses a unique formula of grey resin-based aggregate inserts, which are injected into the deck board grooves. -For most uses two non-slip inserts are appropriate, but there are instances where three inserts should be used, such as on a public walkway that crosses water. Other applications also include footpaths. -Marley recommends the use of AntiSlip Plus^® on decks with public access or where there is an anticipated high level of pedestrian traffic, including stairs and ramps.