Metrotile Mistral Roof Tiles
MISTRAL ROOF TILES
MISTRAL ROOF TILES
A typical European roof with timeless effect
The Mistral profile is designed to get the same appearance of the traditional European roof style, with the additional benefits of steel roofing.
Because of the downturned front and the upturned rear edges, the panels have a strong overlapping and interlocking tile covering, which provides an excellent durability, protection and resistance to wind lift or other extreme weather conditions.
INFORMATION
BRAND
Metrotile
PRODUCT TYPE
Roof Tiles
ALUZINC® COATING
- Aluzinc® Coating Grade : AZ150
- Aluzinc® Coating Mass : 150 g/m²
DIMENSIONS
- Width of cover : 367 mm
- Length of cover : 1240 mm
- Overall Length : 1305 mm
ROOF COVER
0.459 m2
TILES PER M²
2.18
ROOF PITCH
- Maximum : 90 degrees
- Minimum : 10 degrees
WEIGHT
- Area : 6.54 kg/m²
- Panel : 3.00 kg
TEXTURED SURFACE
Stone chip granules are applied to provide an attractive textured finish which at the same time enhance resistance to UV radiation. Granules are ceramic coated with lightfast heat resistant pigments.
BATTEN SPACE
367 mm
UP STAND & DOWN TURN
25 mm
STEEL SPECIFICATION
The Metrotile iSlate tile is made of Aluzinc® alloy coated steel. The grade of steel used is designed to allow forming without cracking or significant elastic recovery and at the same time to be rigid enough to tolerate reasonable loads without excessive deformation.
STONE CHIP
Carefully selected granules provide excellent surface coverage and attractive natural looking and lasting colours.
ROOF COVER
0.459 m²
STEEL THICKNESS
0.41 mm
STEEL GRADE
DX52D
MATERIAL
Steel & Stone
MATERIAL STRUCTURE
TRANSPARENT COATINGS
Both sides of the Aluzinc® alloy coated steel are coated with a transparent layer that provides protection and a uniform substrate for further coatings. This transparent coating allows identification of the aluminium-zinc substrate to be made by distributors and customers.
PANEL
The Mistral is a seven tile, stone-coated panel pressed from a high grade coated steel and is available in a wide selection of colours to enhance any exterior colour scheme.
OVERGLAZE
Clear 100% acrylic resin coating for granule binding and a semi-gloss finish. It helps enhance the appearance as well as increase the resistance to physical damage.
BASECOAT
A tough opaque coating based on acrylic resin. It bonds the stone chips and protects the underlying layer from water and UV radiation. It has good UV resistance and retains its flexibility although it does become harder after the first few weeks.
FINISHES
PAINT
- Matt Black
- Matt Charcoal
- Matt Terracotta
TEXTURED
