Metrotile iSlate Roof Tile & Slate
ISLATE ROOF TILE & SLATE
ISLATE ROOF TILE & SLATE
The attractive appearance of a natural slate
With its finely detailed surface and vertical grooves, iSlate emulates the look of natural slate without the heavy weight and tendency to crack.
The iSlate is an six tile, stone-coated panel pressed from a high grade of protective layer and is available in a wide selection of colours to enhance any exterior colour scheme.
INFORMATION
BRAND
Metrotile
PRODUCT TYPE
Roof Tile & Slate
ALUZINC® COATING
- Aluzinc® Coating Grade : AZ150
- Aluzinc® Coating Mass : 150 g/m²
DIMENSIONS
- Width of cover : 375 mm
- Length of cover : 1235 mm
- Overall Length : 1330 mm [± 3 mm]
- Overall Width : 430 mm [± 3 mm]
ROOF COVER
0.46 m²
TILES PER M²
2.17
ROOF PITCH
- Maximum : 90 degrees
- Minimum : 10 degrees
WEIGHT
- Area : 7.14 kg/m²
- Tile Weight : 3.29 kg
TEXTURED SURFACE
Stone chip granules are applied to provide an attractive textured finish which at the same time enhance resistance to UV radiation. Granules are ceramic coated with lightfast heat resistant pigments.
STEEL THICKNESS
0.41 mm
STEEL GRADE
DX52D
STEEL SPECIFICATION
The Metrotile iSlate tile is made of Aluzinc® alloy coated steel. The grade of steel used is designed to allow forming without cracking or significant elastic recovery and at the same time to be rigid enough to tolerate reasonable loads without excessive deformation.
STONE CHIP
Carefully selected granules provide excellent surface coverage and attractive natural looking and lasting colours.
OVERGLAZE
Clear 100% acrylic resin coating for granule binding and a semi-gloss finish. It helps enhance the appearance as well as increase the resistance to physical damage.
BASECOAT
A tough opaque coating based on acrylic resin. It bonds the stone chips and protects the underlying layer from water and UV radiation. It has good UV resistance and retains its flexibility although it does become harder after the first few weeks.
MATERIAL STRUCTURE
TRANSPARENT COATINGS
Both sides of the Aluzinc® alloy coated steel are coated with a transparent layer that provides protection and a uniform substrate for further coatings. This transparent coating allows identification of the aluminium-zinc substrate to be made by distributors and customers.
FINISHES
TEXTURED
- Coal Black
- Charcoal
PAINT
- Matt Black
- Matt Charcoal
