Dupont Thermax™ White Finish Nh Interior Wall
THERMAX™ WHITE FINISH NH INTERIOR WALL
THERMAX™ WHITE FINISH NH INTERIOR WALL
DuPont™ Thermax™ White Finish NH Insulation is a polyisocyanurate insulation and interior finish system for interior masonry or concrete walls, plus walls and ceilings in metal and concrete or masonry buildings, as governed by building codes.
INFORMATION
BRAND
Dupont
PRODUCT TYPE
Wall Systems
A NON-HALOGEN, EASY TO INSTALL INSULATION THAT LOOKS GREAT AND WORKS HARD
Featuring a white embossed facer that's easy to clean, DuPont™ Thermax™ White Finish NH Insulation combines long-term thermal resistance with dimensional stability and moisture resistance. Thermax™ White Finish NH uses halogen-free flame retardants and is manufactured with zero ozone-depleting potential.
MANUFACTURED UTLIZING HALOGEN-FREE FLAME RETARDANTS
Zero ozone-depleting potential
AVAILABLE SIZES
Standard Thermax™ insulation board dimensions are 4'x8'. Custom lengths are available up to 30'.
COLLECTION
Thermax™
PRODUCTION
Made in United States
SUSTAINABLE SOLUTIONS
-Thermax™ White Finish NH is manufactured with a zero ozone-depleting potential. The use of Thermax™ White Finish NH helps reduce the carbon footprint of commercial buildings. -Thermax™ White Finish NH uses halogen-free flame retardants and is manufactured with zero ozone-depleting potential.
LONG-TERM THERMAL RESISTANCE
- R-Value of 6.6 at 1" thickness.
- Twenty-year limited thermal warranty available.
AESTHETICALLY PLEASING WHITE FINISH FOR INTERIOR APPLICATIONS
- Pressure washable up to 1,000 psi.
- Can be installed exposed to the interior without a thermal barrier.
EASY TO CUT, HANDLE, AND INSTALL
Easy to use
MOISTURE RESISTANT
Helps reduce the potential for condensation within the wall assembly
EASE OF INSTALLATION
-Able to be installed exposed to the interior without a thermal barrier.
-Able to be adhered directly to masonry walls with a construction grade adhesive. -Lightweight and easy to handle – can be sawed or cut with a knife, small hand saw or circular saw. -Composed of white acrylic facers that resist damage, are pressure-washable, and reduce light energy cost and air infiltration.
GLASS FIBER-REINFORCED
The glass-fiber-reinforced polyisocyanurate foam core is faced with a nominal 1.25-mil embossed white acrylic coated aluminum on one side and 0.9-mil smooth aluminum on the other.
SURFACE
The white embossed surface of Thermax™ White Finish NHis aesthetically pleasing and easy to clean and can be pressure-washed up to 1,000 psi with a 15-degree or greater spray tip (at minimum 3’ distance).
RANGE OF TEMPERATURE
DuPont™ Thermax™ Brand insulation delivers wall performance you can count on. It’s ready to meet your toughest building challenges – both outside and inside the wall – with a robust polyiso insulation product line and an R-Value that’s proven consistent over time and a range of temperatures.
TECHNICAL DETAIL
SIZES, R-VALUES(3) AND EDGE TREATMENTS FOR THERMAX™ WHITE FINISH NH INSULATION
| NOMINAL FOAM THICKNESS, IN | R-VALUE(1)(2) | BOARD SIZE (FT.) | EDGE TREATMENT |
|---|---|---|---|
| 0.50 | 3.6 | 4 x 8 | Square Edge |
| 0.75 | 5.1 | 4 x 8 | Square Edge |
| 1.0 | 6.6 | 4 x 8 | Square Edge |
| 1.25 | 8.1 | 4 x 8 | Square Edge |
| 1.50 | 9.5 | 4 x 8 | Square Edge, Shiplap |
| 1.55 | 10 | 4 x 8 | Square Edge, Shiplap |
| 1.75 | 11 | 4 x 8 | Square Edge |
| 2.0 | 13 | 4 x 8 | Square Edge, Shiplap |
| 2.5 | 16 | 4 x 8 | Square Edge |
| 3.0 | 18.5 | 4 x 8 | Square Edge, Shiplap |
PHYSICAL PROPERTIES
| PROPERTIES | METHOD | UNIT | VALUE |
|---|---|---|---|
| R-Value (Thermal Resistance at 75°F Mean Temperature) | ASTM C518 (ASTM-54) | ft2•hr•°F/Btu | 6.6 |
| R-Value (Thermal Resistance at 40°F Mean Temperature) | ASTM C518 (ASTM-54) | ft2•hr•°F/Btu | 6.8 |
| Compressive Strength (PPSH-57)3 | ASTM D1621 (ASTM-65) | Psi, min (kPa) | 25 (170) |
| Water Absorption (PPSH-277) | ASTM C209 | % by volume, max. | 0.1 |
| Water Vapor Permeance | ASTM E96 | perm, max | 0.02 |
| Flexural Strength (PPSH-118) | ASTM C203 | Psi, min (kPa) | 40 (275) |
