EFP Unitised Curtain Wall system
UNITISED CURTAIN WALL SYSTEM
UNITISED CURTAIN WALL SYSTEM
Nowadays, construction requires faster lead times and the risk of failures must be reduced to a minimum. The logistical challenges are huge as traffic requires an optimum just-in-time principle.
information
BRAND
EFP
PRODUCT TYPE
Window System
COLLECTION
Unitised
SHORT INSTALLATION
Short installation time with minimum site staff
GLASS THICKNESS
24mm up to 68mm; glazing according BS 6262
PRODUCTION
Made in The Netherlands
THERMAL INSULATION
class 2.1 in accordance with EN ISO 10077-1
DRAINAGE
Mullion Drained And Pressure Equalised As Specified In Bs 6262
WIND RESISTANCE
-2400 Pa design- 3300 Pa safety – according ASTM E 330
WATER TIGHTNESS
up to 1200 Pa cyclic pressure (AS/NZS 4284) and static according ASTM E 331
THERMALLY
Thermally insulated
AIR INFILTRATION
According ASTM E 283
CONTINUOUS
Continuous horizontal centre seal so hardly any use of sealant required on site
SOUND ISOLATION
Depending largely upon the glass specification, generally the curtain wall framing reduces the figure by 2dB(A)
EXTERNAL FEATURES
Various external features like cover caps, integrated canopies, solar panels or stone panel solutions are available for the system. Concealed windows can be fully integrated to create possibilities of natural ventilation without the aspect of window bars.
TESTED
Tested and certified
CUSTOM
Custom made (bespoke) solutions
TECHNICAL DRAWINGS
Frame Detail
Stack Joint
PERFECT SOLUTION
When installation can be done by a minimum number of people and without the use of complicated scaffolding and expensive cranes then the advantages are there! On average, a team will be able to install about 300 m2 per shift, that makes the EFP 65 Unitised System the perfect solution!
3 BARRIER
3 barrier, drained and pressure equalised
QUALITY
Factory made units gives optimum quality
