Volteco Bi Mortar Concrete Seal
BI MORTAR CONCRETE SEAL
BI MORTAR CONCRETE SEAL
White, flexible and decorative waterproofing coating, particularly suitable for structures in contact with water such as swimming pools, fountains and tanks
information
APPLICATION TEMPERATURE
From +5°C to +30°C
WORKABILITY TIME AT +20°C
20’
BRAND
Volteco
PRODUCT TYPE
Mortar
COLLECTION
Bi
PRODUCTION
Made in Italy
CONSUMPTION AND YIELD
2.5÷3 kg/m² depending on the irregularity and roughness of the surface.A bag of BI MORTAR CONCRETE SEAL waterproofs an area of 8÷10 m².
THE ADVANTAGES OF BI MORTAR RASO SEAL
-Suitable for both indoor and outdoor application -Particularly resistant to abrasion and impact -Suitable for continuous contact with water -Easy maintenance, also in conditions of high humidity and closed environments
-Simple, quick and economical brush or spatula application with excellent workability -Excellent impermeability performance -Permeable to vapour
-Usable with negative and positive hydrostatic pressure
APPEARANCE
Grey Powder
COATING
Waterproofing Coating
COLOR
White
MATERIAL
Concrete & Brick
MIXTURE RATIO
- 28 Parts Liquid
- 100 parts powder
ADVANTAGE
-Suitable for both indoor and outdoor application -Particularly resistant to abrasion and impact -Suitable for continuous contact with water -Easy maintenance, also in conditions of high humidity and closed environments
DOWNLOADS
↓ Technical data sheets
↓ Safety data sheets
↓ Declarations of performance
↓ Specifications
↓ Technical drawings
↓ Brochures and depliants
PREPARATION AND APPLICATION
PREPARING THE MIXTURE
Pour the mixing water into a container (approx. 5,6 l per bag equivalent to 28% in weight) and slowly add the powder, mixing it with a drill-mixer for about 3 minutes, until a fluid and smooth mixture is obtained.
SPRAYED APPLICATION
The product can also be applied with a plastering machine with levelling wands after separately mixing the product (for more information contact the Volteco Technical Service).
FINISHING
When applied indoors, it is recommended to coat the walls with the CALIBRO system as an anti-condensation layer, on top of which an X-LIME finish is possible.
APPLICATION
Dampen the surface until it no longer absorbs any more.With highly absorbent substrates, keep the surface wet until BI MORTAR CONCRETE SEAL is applied.Apply two coats of BI MORTAR CONCRETE SEAL with brush, Volteco large brush or metal spatula. The first coat must cover every irregularity evenly and fill the superficial pores.If the brush/large brush tends to drag the product, dampen the surface more.The second coat needs to be applied when the first is sufficiently hard, normally the day after butnevertheless no sooner than 8 hours.Dampen the surfaces and apply the second layer taking care to create uniformity of the waterproof layer.
PREPARATION OF ELEMENTS OF DISCONTINUITY ON THE SURFACES
WATER FLOWS Seal any water inflow with TAP 3/I-PLUG quick-setting mortar (see the relatedtechnical data sheet)
Construction jointds and cracks Seal the construction joints and cracks with AKTI-VO 201mastic and/or BI FLEX system (see the relative technical data sheets) PASSING BODIES Seal all the passing bodies, including spacers and pipes, with AKTI-VO 201mastic (see related technical data sheet) JOINTS Contact the Volteco Technical Service before intervening on the expansion joints
CURING
When waterproofing foundation walls, let it cure for at least 24 hours after application before backfilling.When coating the waterproofing with any type of protective layer or finish (ceramic coating, protective screed, plaster, cement-based levelling compound, plastic drainage, etc.), let it cure at least 3 days after application. When water proofing structures intended to contain water, allow a curing phase of at least 7 days once the product is applied. The curing times can be longer in the presence of a low temperature, high humidity or premature contact with wate
