Sannini Piastra 50mm False Joints Ventilated Facade
PIASTRA 50MM FALSE JOINTS VENTILATED FACADE
PIASTRA 50MM FALSE JOINTS VENTILATED FACADE
Curtain wall realized with “Piastra 50 mm false joints”
INFORMATION
PRODUCT TYPE
Ventilated Facade
BRAND
Sannini
SIZES
500x295x50
WEIGHT
10.5 kg
FINISHING
Brushed litos
INSTALLATION
Supply and installation of a “curtain wall” cladding, composed of a mechanical steel / extruded raw aluminum fixing system and Sannini Impruneta terracotta elements, acid-washed and treated.
STRAPS
Sections are bound to the support slabs and fixed to the wall by means of special straps and expansion bolts equipped with adjustable spacers and anchors for the fastening of the Cotto elements.
PRIMARY STRUCTURE
Primary structure constituted of vertical sections of stainless steel / extruded raw aluminum placed at 50 cm distance approximately.
CLADDING ELEMENTS
The cladding is realized with Cotto element “Piastra 50 mm false joints”, manufactured out of a special clay extracted from the Impruneta area.
DETAIL
The elements are supplied in sizes of (l x h x t): mm 500 x 295 x 50 mm. They have normal kerfs on their upper and lower side and a surface finish “Litos” or “Arrotato”, installed with vertical and horizontal joints of about 6 mm. The Cotto elements are to be installed carefully in order to avoid possible out of square placement and to provide compensation for any tolerance from the existing backup wall or reinforced concrete structure, leaving a space of about 8/10 cm between the back face of the cladding elements and the support wall.
Treatment: the external face of the Sannini Cotto element requires acid-washing by using a decalcifying acid solution for the removal of possible efflorescence and surface protection through the application of an impregnation on a siloxane micro-emulsion basis.
TECHNICAL DRAWINGS
COLORS
NATURAL BRUSHED
Extruded terracotta with rustic surface, obtained through working the element’s surface with steel brushes prior to firing. The intense colour of this tile is due to the removal of surface salts during the brushing process.
TOBACCO BRUSHED
Extruded terracotta with rustic surface “arrotato” and fullbody tobacco colouration.
The coloration is being obtained by mixing a composition of oxides into the clay, allowing a uniform colour penetration
CHAMPAGNE BRUSHED
Extruded terracotta with rustic surface “arrotato” and fullbody champagne colouration.
The coloration is being obtained by mixing a composition of oxides into the clay, allowing a uniform colour penetration and distribution. All physical and mechanical characteristics remain unaltered.
NATURAL LITOS
Extruded terracotta with rustic surface, obtained through working the element’s surface with steel brushes prior to firing. The intense colour of this tile is due to the removal of surface salts during the brushing process.
TOBACCO LITOS
Extruded terracotta with smooth “litos” surface and fullbody tobacco colouration.
The coloration is being obtained by mixing a composition of oxides into the clay, allowing a uniform colour penetration and distribution. All physical and mechanical characteristics remain unaltered.
HAMPAGNE BRUSHED
Extruded terracotta with smooth “litos” surface and fullbody champagne colouration.
The coloration is being obtained by mixing a composition of oxides into the clay, allowing a uniform colour penetration and distribution. All physical and mechanical characteristics remain unaltered.CHAMPAGNE LITOS
