Leeboy Maximizer 4B Machine
MAXIMIZER 4B MACHINE
MAXIMIZER 4B MACHINE
Distributors
Reach your full potential with the new Rosco Maximizer 4B. This trusted machine features a 24ft fully circulating, folding and extending spraybar as well as the user-friendly attributes you’ve come to love in the Rosco Distributor family.
In-cab controls with automatic application rate control ensure consistent emulsion coverage. The large color display allows operators to monitor vitals, oversee width changes and engage the enviro-flush clean out system.
With multiple tank capacities and an array of options including an oil heating system, each truck can be customized to fit your exact requirements.
INFORMATION
BRAND
Leeboy
PRODUCT TYPE
Machine
PRODUCTION
Made in USA
DIMENSIONS
Depends on type of truck purchased and options selected
COLLECTION
Maximizer
PUMP
560 gallons per minute
DOWNLOADS
↓ Brochure
↓ SOP Manual
SURGE PLATES
10 gauge steel with staggered openings to provide adequate tank strength and proper surge control
INSULATION
-2” rock wool with spacers to prevent compression -Clips to secure position of insulation and protected by an aluminum jacket
TANK
- Flush tank : 25 gallons
- Enviro-Flush tank : 25 gallons
THERMOMETERS
- One 4” dial thermometer
- One internal pencil thermometer
CAPACITY
2.050 gallons to 5.313 gallons Gallons listed are maximum tank capacities. Recommended tank capacities may be limited by 1.) Thermal expansion of materials. 2.) Density of materials. 3.) Truck/axle load ratings. For more detail, please contact your local LeeBoy Dealer.
ASPHALT PUMP
-Viking, positive displacement pump -Rotary gear type with built-in relief valve for safety -Asphalt pump driven by low-speed high torque fixed displacement hydraulic motor and connected by a flexible coupling
HEATING SYSTEM
-Two diesel fired burners with electric ignition and heat limit controls -Two, u-type, high temperature flue pipes running the length of the tank -Single exhaust stack is constructed of stainless steel and includes a rain cover, removable if service is needed
MANHOLE
-Inside splash guards -Steel measuring stick -Tank vent and overflow -Overflow: 3” in diameter -Manhole opening: 22” in diameter -Weather tight and safety relieving cover with basket-type strainer
SUMP
- At the rear of tank
- Sump size: 4” in diameter
- Cleanout plug and suction line from the pump includes tank cutoff valve
DISTRIBUTING LINES
-High temperature, flexible metal hoses -Steel pipe with ball and socket joint is not acceptable
VOLTAGE
240V
MATERIAL
Steel
HEATING FLUE SIZE
8” in diameter throughout
LIGHTS
LED working lights, qty 4
OPTIONAL OIL HEAT
-Heat exchanger in lower flue tube -Jacketing on emulsion tank sump -Jacketed Viking asphalt pump -Internal spraybar heating -High-temperature insulated flexible metal hoses and hard line
TRAINING, SUPPORT AND COMPANY
-Training and support manuals -Optional on-site operator training by Dealer -Two-year, unlimited hours warranty against any manufacturer defects -Extended warranty available -55+ years manufacturing experience -ISO 9001 Certified -Sourcewell Contract# 052417-VTL -Manufactured in the USA
BURNERS
560.000 BTU per burner, per hour capacity
PROTECTION
LPG burner with electric ignition, 100% outfire protection and heat limit control
HYDROSTATIC POWER
-Hydrostatic, front live power driven by engine crankshaft -The hydrostatic pump is an infinitely variable displacement axial piston pump -Hydraulic reservoir: 20 gallons with thermometer and sight gauge and level indicator
ADDITIONAL STANDARD EQUIPMENT
-Hand spray wand with a 25’ rubber hose -Front and rear dial contents gauge -4” dial thermometer and internal pencil thermometers -ICC clearance lights and reflectors -Rear bumper to protect spraybar -Sample valve -Back-up alarm -Mud flaps -Ladder and platform assembly -Grease gun -Beacon light
CLEAN OUT
-Cleanout material returned to enviro-flush tank for later use or disposal -Enviro-flush system allows solvent circulation through asphalt pump, valves, distributing lines and spraybar
DETAIL
SPRAY SYSTEM
-Nozzles are brass, slotted and valves are non-clogging -Each has a quick-disconnect feature allowing the operator to change spray widths in 4” increments across the entire bar without the use of tools or blank nozzles -Spraybar: 24’ full circulating, extendible spraybar : Two 8’ independently controlled extending sections , Each spray nozzle automatically turns on when extended and off when retracted, Two 4’ fully circulating hydraulically folding wings, Spray nozzles operated in 1’ increments, All functions operated by the Plus+1 controller in the cab -Nozzles : Spaced on 4” centers on spraybar
OPTIONAL EQUIPMENT
-Installation for a customer supplied truck chassis -PTO transmission (required if not using front live power) -LPG burner in lieu of diesel burner [includes 48 gallon LP tank] -Diesel burners with electronic ignition, 100% outfire protection and heat limit control -Diesel burners with outfire protection and heat limit control -Electronically actuated emulsion tank hand rails
-Washdown system with pump and hose, self-winding hose reel -Loading hose, 3” x 15’ flexible steel with quick couplers -Loading hose, 3” x 15’ rubber with quick couplers -Hose trough for loading hose -LED working lights, qty 4 -Frame mounted toolbox -Extra fender mounted toolbox -Wet storage box -Full width mud flap -Hot oil option -Electric overnight heat, 240V single phase -GPS in lieu of radar horn -Nozzle selection -Back-up/ reverse camera w/ in cab color display
CONTROLLER
-Plus+1 CAN Bus control and onboard diagnostic system -7” high-resolution, color graphic display -Controller for automatic application rate control -Automatic valves for cab control of distributor functions -Exclusive enviro-flush system with hydraulic pump speed control -Settings for flow, speed calibration, spraybar width and spray bar on/off control by section -Automatic valves for cab control of distributor functions
-Capable of storing up to 12 preset combinations of application rates and flow calibrations for instant retrieval -Selectable readouts include FPM, GPM, total feet sprayed, total gallons sprayed, total square yards sprayed, flow and speed calibration, application rate, tank temperature, hour meter and spraybar width (English and metric units can be selected for the rate controls) -Controller provides accurate applications regardless of changes in speed or spraybar width during operations -Includes radar horn ground speed sensor -Convenient external controls and speed display mounted on rear fender
