
Zehnder Pumpen SWH 100 Pumping Water System
PUMPEN SWH 100 PUMPING WATER SYSTEM
INFORMATION
BRAND
Zehnder Pumpen
PRODUCT TYPE
Pumping Water System
APPLICATION
Disposal
PRODUCT NUMBER
11463
PRODUCT BENEFITS
-Ready for connection - pump and control unit already
-Integrated integrated audible alarm -Double safety due to 2nd float (alarm float) -All connections prepared; all connection pieces included in delivery -Pump fixed on lid for ease of maintenance
VOLTAGE [V]
230
C [ΜF]
5
SCOPE OF DELIVERY
Pre-assembled ready for connection with 1,5 m power cable and plug
SOLIDS HANDLING
10 mm
PRESSURE OUTLET
1 1/4" IT
DOWNLOADS
↓ Manual
↓ Data sheet
↓ Brochure lifting units
APPLICATION
-Pumping of domestic waste water from washing machines, showers, washbasins etc.
-Above-ground installation in frost-free rooms below the backflow level
INSTALLATION LOCATION
Inside Buildings
MAX. TEMPERATURE
40 (kurzzeitig 90) °C
NOMINAL CURRENT
1.3 A
POWER P1
300 W
MATERIAL
- Material container : PP
- Seal motor : Shaft seal NBR
- Material impeller : PA6 GV25
- Material pump housing : PP GF20
- Material motor shaft : Stainless steel AISI 430F
- Material motor housing : Stainless steel AISI 316L
- Seal pump : Mechanical seal carbon/ceramic/NBR
PUMPED MEDIUM
Waste Water
SPEED [U/MIN]
2800
PROTECTION GRADE
-Protection grade IP 57 - temporary submersible -Waste water lifting unit
POWER P2
130
FEATURES
Reedkontakt
MODEL
- Active carbon filter for container ventilation
-Protection grade IP 57 - temporary submersible
- Operation temperature 40°C (short-term 90°C)
- Pressure outlet 1 ¼“ FPT with integrated non-return valve
- Polypropylene container with 20 litres capacity and up to 10 litres
- Potential-free contact for external alarm or washing machine stop
- Switching volume switching device integrated in lid with audible high water alarm signal
- Prepared shower inlet DN 50 usable on both sides (container bottom edge til middle of shower inlet only 80 mm)
