Lang+Fulton Novara-34 Fences
NOVARA-34 FENCES
NOVARA-34 FENCES
Novara-34 has been designed to meet the properties required for anti-climb fencing and provides excellent security making it particularly appropriate for schools and colleges.
The tight aperture complies with NHBC guidelines and the 1620mm panel width provides exceptional rigidity.
Standard panels are framed to include a bent over lug for fixing to an RHS or flat bar post. An RHS with welded tabs or an I-post can be used to reduce the gap between panel and post for increased safety and security.
In addition to the standard panel, a narrow width closing panel will be provided to suit the end of a fence run.
Novara-34 fences can also be customised to feature curved or waved tops, decorative rails and finials, ornamental or laser-cut motifs.
Swing-hinged single or double leaf, bi-folding, pivot and sliding gates are made with matching infill panels and optional entry/exit controls for restricted access.
Novara-34 fencing is supplied hot-dip galvanized with an optional polyester powder coating in any RAL colour. All grating fences are made in compliance with BS 1722-14.
INFORMATION
MESH SIZE
- Vertical flat bars : 25 x 3 mm
- Horizontal round bars : 4 mm diameter.
BRAND
Lang+Fulton
PRODUCT TYPE
Fences
PRODUCTION
Made in United Kingdom
STANDARD PANEL WIDTH
1620 mm
SYSTEM ACCESSORIES
- Wood finials.
- Steel finials.
- Not required.
- Laser cut panels.
- Entry/ exit controls.
- Ornamental motifs.
FENCE TOPPING
- Curved Top.
- Waved Top.
- Not Required.
- Decorative Rail.
ORIENTATION
Round bars set to inside of enclosed area.
RHS POST
50×30, 60×40, 80×40, 100×50 mm (depending on height)
MESH (C/C)
34×100 mm
APERTURE
34 x 100 mm.
FRAMING
Framed top and bottom with flat bars. Guidance for specification option :
-Fence Heights of 2000 mm and above have an additional intermediate fixing. -Framing bar is bent over at the ends to form fixing lugs for a bolted panel-to-post connection.
EMBODIED CARBON
A1-A3 (production stage) as defined in BS EN 15804 : 1.42 kg CO₂ eq/kg
RAILS
- Hand Rail.
- Not Required.
COUNTRY OF PRODUCT MANUFACTURE
United Kingdom
MATERIAL
Steel
RECYCLABILITY
100%
STANDARD
To BS 1722-14.
POST
Mild steel S235JR.
PANELS
Vertical flat bars and horizontal round bars, framed top and bottom with flat bars, mild steel S235JR.
POST FOUNDATIONS
Ground fixing (concrete mix). Guidance for specification option :
-Refer to BS 1722 giving consideration to existing ground conditions. -Posts to be set in holes 300 to 400 mm square in plan and between 550 and 700 mm in depth, depending on fence height. -Holes should be completely filled to a minimum of 50 mm below ground level with concrete mix (minimum strength of C20).
COUNTRY OF MATERIAL ORIGIN
Europe
CONTAINS RED LIST MATERIALS
No
RECYCLED CONTENT
As defined in clause 7.8 of BS EN ISO 14021 : 56 %
STANDARD PANEL HEIGHTS
- 1006 mm
- 1206 mm
- 1506 mm
- 1806 mm
- 2006 mm
- 2406 mm
- 2706 mm
- 3006 mm
FIXING
M10 x 70 mm stainless steel bolts, domed heads and snap-off security nuts, grade A2.
Guidance for specification option : Panels fixed to posts.
FINISHES
- Hot-dip galvanized. Guidance for specification option : To BS EN ISO 1461.
- Hot-dip galvanized and polyester powder coated, RAL. Guidance for specification option : -Insert colour requirement. -To BS EN ISO 1461 and polyester powder coated to BS EN 1722-16 in any RAL colour.
OTHER REQUIREMENTS
- Waved top.
- Curved top.
- Not required.
- Decorative rails.
- Radiused panels.
- Ornamental motifs and laser cut panels.
- Handrails and feature posts with optional finials in steel.
- Handrails and feature posts with optional finials in wood.
