CTS Rapid Set Tru® Pc Cement
Rapid Set Tru® Pc Cement
RAPID SET TRU® PC CEMENT
High Performance, Self-Leveling, Architectural Topping in Natural and Gray
INFORMATION
CONCRETE
Simulates polished concrete.
BRAND
CTS
PRODUCT TYPE
Cement
GRIND
Grind wet or dry and polish in 24 hours.
POLISHING
TRU PC may be polished wet or dry after 24 hours at normal conditions. TRU PC grinds and polishes much like concrete and can achieve a very high gloss and Distinctness-of-Image (DOI) due to its excellent surface hardness. Polishing any topping requires a high degree of experience and craftsmanship. Contact CTS Cement for a list of preferred installers.
COLLECTION
Rapid
PRODUCTION
Made in United States
DETAIL
Rapid set® corrosion inhibitor is a high performance additive designed to extend the life of reinforced concrete structures. Available in individual use packets, corrosion inhibitor is a specialty powder additive that is combined with rapid set concrete repair materials during mixing. Corrosion inhibitor provides triple protection against corrosion by creating a protective barrier on embedded steel, repelling water and reducing chloride ion permeability.
USE FOR POLISHED
Use for polished concrete floors in schools, airports, warehouses, retail, restaurants, lobbies, and more. TRU PC is available in natural and gray colors. Tested in accordance with ASTM C1708 and CDPH Standard Method v1.2.
DIRECTIONS
Use one 1.7-oz (50-grams) packet of corrosion inhibitor per 50-lb to 70-lb bag of rapid set pre-blended concrete repair product. For severe conditions, up to 2 packets may be added. Use only with approved rapid set products. Place water into the mixing container. While mixing, add half the dry cement product. While continuing to mix, add corrosion inhibitor packet(s) followed by the remainder of the cement product. Combine with other concrete pharmacy products for added performance.
FLOW LIFE
15 minutes
DOWNLOAD
↓ Data Sheet
POLISHED CONCRETE
TRU® PC Polished Concrete is a high-flow topping that simulates polished concrete after grinding and polishing to expose the aggregate.Place with a minimum thickness of 3/8", or a minimum thickness of 1/2" for floors subjected to high-load, rubber-wheeled traffic.
LIMITED WARRANTY
Cts cement manufacturing corp. (cts) warrants its materials to be of good quality and, at its option, will replace or refund the purchase price of any material proven to be defective within one (1) year from date of purchase. The above remedies shall be the limit of cts’ responsibility. Except for the foregoing, all warranties expressed or implied, including merchantability and fitness for a particular purpose, are excluded. Cts shall not be liable for any consequential, incidental, or special damages arising directly or indirectly from the use of the materials.
ASTM
C1708
CONCRETE OVERLAYMENT
03 53 19
SHELF LIFE
Corrosion inhibitor has a shelf life of 12 months when stored properly in a dry location, protected from moisture, out of direct sunlight, and in an undamaged package.
USE
Use corrosion inhibitor in corrosive environments such as marine applications, high humidity, roadways subject to deicing salt, and severe weathering. Corrosion inhibitor may be used in combination with all other products of the rapid set® concrete pharmacy®.
ENVIRONMENTAL ADVANTAGE
Use TRU PC to reduce your carbon footprint and lower your environmental impact. Production of Rapid Set cement emits far less CO2 than portland cement. Contact your CTS representative for EPD, LEED values and other sustainability information.
HIGHLIGHTS
-Interior/Exterior: Durable in dry and wet areas
-Polished Concrete Appearance: A high-flow topping that simulates polished concrete
-Outstanding Clarity & Gloss: Highly polishable with excellent surface hardness
-Fast Track: Foot traffic in 2 to 3 hours, grind wet or dry, and polish in 24 hours
-High Strength: 5000 psi (34.5 Mpa) in 24 hours, 7000 psi (48.3 Mpa) in 28
days
MAINTENANCE OF CAST DECKS AND UNDERLAYMENT
03 01 50
HYDRAULIC CEMENT UNDERLAYMENT
03 54 16
VEDIOS
