Coveringsetc Eco-cem® Fiber Cement Panel Facade
ECO-CEM® FIBER CEMENT PANEL FACADE
ECO-CEM® FIBER CEMENT PANEL FACADE
Resilient - Versatile – Sustainable
Eco-Cem® is our Fiber Cement facade panel crafted from natural raw materials. Our tiles and slabs embody industrial design with warm tones and a natural finish.
Eco-Cem® stands out as a versatile and resilient product, a sustainable construction material engineered by CoveringsETC. You can customize the size and color options according to your specific needs, making it an ideal choice for innovative and durable building projects.
Adaptability is a crucial feature of Eco-Cem®, as it can be tailored to meet project requirements, including incorporating window and door openings. Whether used in exterior cladding, flooring, walls, or industrial design projects, Eco-Cem® proves its worth as a frost-resistant and highly wear-resistant solution.
INFORMATION
BRAND
Coveringsetc
PRODUCT TYPE
Fiber Cement Panel Facade
DESIGN FLEXIBILITY
Eco-Cem® offers infinite design possibilities, with natural finishes in 12 standard colors that ooze a cozy, industrial look. Our tiles and slabs can be tailored to cut to any size, shape, or perforation to meet your project's specific requirements, enabling you to create custom solutions that make a statement.
STANDARD SIZES
- 16x16"
- 24x24"
- 48x48"
- 24x48"
- 120x48"
COLLECTION
Eco-cem®
PRODUCTION
Made in USA
FINISH
Honed
THICKNESS OPTIONS
- 5/8", ¼", and ½".
DETAIL
Emanate warmth in your surrounds with EcoCem® ideal for walls and facade. Eco-Cem® is a Future-Friendly™ material made of concrete strengthened with cellulose fibers offering a contemporary yet warm industrial look. Contains both pre & post consumer recycled content; may help contribute toward LEED® credits with USGBC project certification.
DURABILITY AND INSTALLATION EFFICIENCY
Eco-Cem® is a wise choice for climate change. It boasts an impressive level of durability and is easy to install and maintain, serving as an overall low-maintenance product. The panels also benefit from a double-pressed, autoclaved, and fully colored construction, capable of providing creative solutions that stand the test of time. During the finishing phase, both sides of the sheet are sanded to ensure proper calibration and surface uniformity. Our organic finish is also breathable, allowing for adequate moisture passage and giving the edges of the sheet a unique patina.
DOWNLOADS
↓ Eco-cem® csi
↓ Eco-cem® cut sheet
↓ Eco-cem® hpd v2.3
↓ Eco-cem® specifications
↓ Eco-cem® sustainability sheet
↓ Eco-cem® care and maintenance
↓ Eco-cem® material safety data sheet
SUSTAINABILITY
At the core of our Fiber Cement sheets lies a commitment to sustainability. It is manufactured using 80% recycled Portland cement blended with fly ash that has been saved from contaminating waterways, with the remaining 20% recycled wood pulp. Our fiber cement is an eco-friendly product using minimal materials and energy in manufacturing. It contains no resins, no epoxy, and zero VOCs, meaning it is breathable and contributes to improved indoor air quality. Moreover, pre-consumer recycled content contributes towards LEED® points for USGBC project certification.
TECHNICAL SPECIFICATIONS
| TEST PERFORMED | ASTM | RESULTS |
|---|---|---|
| Static coefficient of friction | C-1028 | Dry : 0.95 & Wet : 0.92 |
| Modulus Of Rupture | C-120 | Dry : 1,800 psi & Wet : 800 psi |
| Modulus Of Elasticity | C-469 | 1.75x106 psi |
| Shear Strength | D-732 | Dry : 1.200 psi & Wet : 1.170 psi |
| Tensile Strength | D-209 | Dry : 600 psi & Wet : 450 psi |
| Compressive Strength | C-170 | Dry : 3.900 psi & Wet : 3.000 psi |
| Water Vapor Permeance | E-96 | 6.5 perms |
| Thermal Conductivity (K) | C-58 | 1.43 BTU-In/Hr F |
| Flame Spread And Smoke Development Index | E-84 | Flame : 0 index Smoke : 0 index |
COLORS
COLORS
CARE AND MAINTENANCE
STAIN REMOVAL / SURFACE REPAIR
ECO-CEM® is a natural material that due to its high content of cellulose fibers will develop a patina and may stain. Spills should be cleaned up immediately to avoid staining of the surface. ECO-CEM® may be sanded down if the need occurs. Due to the components of the material a natural uneven coloration may become emphasized – not unlike poured concrete.
SPILLS
Clean-up spills as they happen, rinse with water or, if needed, a normal household cleaning agent.
DIRT AND GRIT
The surface of ECO-CEM® is smooth thus dirt and dust do not stick. However, grit and sand can act like sandpaper on the finish causing scratches, dents and dulling. Therefore, we recommend the placement of floor mats at entrances to trap debris and prevent scuffing, and to sweep or vacuum regularly.
DAMP MOP
Damp mopping is the fastest and most thorough way to deep-clean ECO-CEM® flooring. With medium to heavy traffic you may want to damp mop as often as once a week. Avoid oil soaps as they may stain the surface. Use a mixture of neutral PH non-oily cleaner with water. Mop generously with this mixture, rinse the mop in clean water, wring the mop dry, and then mop once again for a final rinse.
DISCLAIMER
Proper preparation and installation is the responsibility of the user. These recommendations are supplied as a technical service and may be subject to change. For detailed questions as well as purchasing of the products please contact the manufacturer directly.
INSTALLATION
DISCLAIMER
Proper preparation and installation is the responsibility of the user. These recommendations are supplied as a technical service and may be subject to change. For detailed questions as well as purchasing of the sealer products please contact the manufacturer directly.
COMPLETION
Once ECO-CEM® floor boards have been installed; they require a minimum of 48 hours to set before use. In addition to the 48 hours, we recommend the new flooring be protected with plastic sheeting from any construction related traffic until the entire project is completed.
FASTENING
ECO-CEM® can easily be nailed or screwed to framing. All fasteners used to attach panels to supports must be corrosion resistant. Do not use standard phosphate treated black drywall screws. Fasteners should maintain maximum spacing along supports of 16” o/c. Centerline of fasteners should maintain a minimum of ¾” from the edge of ECO-CEM® panels. Screw heads should be flush with surface of panel. For electric screwdrivers use variable speed 2,500 RPM maximum.
GROUTING
ECO-CEM® joints smaller than 3mm should be grouted with a non-sanded grout, for larger joints one should use sanded grout. Recommended grout joint width is 0.5% of the longest side of the tile (i.e. for a tile 24”x48” the joint width should be ¼”). There are many good materials for use as grout. Please refer to your installer for products and specific installation instructions. The grout cleaning must be done before complete hardening. Use a soft sponge with clean water and pass over the surface various times.
TRANSPORT AND STORAGE
ECO-CEM® panels are extremely impact resistant and require minimal packaging. During transportation, use stable flat pallets the same dimension as the panels. When moving panels, lift in order to prevent scratches on the panel surface. Store in an enclosed area protected against heat and humidity. For horizontal storage provide support along the entire bottom surface area with a protective layer between the pallet and the panels as well as on top. For vertical storage provide same protection with additional support for height.
EXISTING SUBSTRATES
ECO-CEM® must be installed on a level surface. Leveler - The leveling of old surfaces in cement can be achieved with a professional, non-shrink leveling product.
-a) Concrete : At the time of installation, the substrate must be cured, free from hygrometric shrinkage, and must be even, compact, clean, and have a residual humidity of equal to or less than 2%. For the direct installation to a concrete slab, with the exception of leveling compounds, it is necessary to wait for a period of 1 month for the concrete to cure. For slabs subject to flexural strain, the allowed sag may exceed 1/360 of the total span of the structural system of support.
-b) Iron : Surfaces in iron must be accurately cleaned and all residual traces of oil removed. If the iron is painted, check the degree of adhesion of the paint to evaluate the convenience of completely removing it by means of abrasives or a paint-stripper
-c) Wood : Wood Check the dimensional stability of the support and its sensitivity to humidity. If the wood is painted or varnished, remove the coloring completely with appropriate paint stripping agents or abrasives.
INSTALLATION
ECO-CEM® panels are easy to install and line up smoothly onto the adhesive. It is necessary to pound the material with a rubber hammer and press against the corners. After laying it is recommended to cover the area with plastic sheets and place weights - about 22 pounds (or more) of weight - for 24 hours to be placed on each corner. When applying the adhesive it is important to be certain that all corners are sufficiently coated underneath. Recommended adhesive for installation of Eco Cem is Kerakoll Superflex.
The installation of ECO-CEM® panels requires freshly applied adhesive. Spread Kerakoll’s SUPERFLEX, a two-component, high-elasticity, polyurethane adhesive over the substrate with a 3/8” (10 mm) toothed trowel. Press down with care to obtain best results. For large formats, it is advisable to install with the “buttering and floating” method of spreading the adhesive over the substrate with a suitable toothed trowel, then smoothing the back of the slab. It is necessary to keep exposed all pre-existing expansion joints of the surface.
In addition, it is necessary to leave 1/8’’-1/4’’ inch of free space around the entire perimeter of the area to allow for overall surface expansion. This allowance will be covered by the skirting board and will not be visible. Please consult with your structural engineer for more detailed information. Once a panel has adhered to the surface it is difficult to remove. If a panel gets soiled by fresh adhesive it can be cleaned with alcohol or toluene. If the adhesive has hardened it can be removed by scraping the surface with a chisel or steel wool. The quantity of adhesive needed may vary according to the surface area (approximately 0.4 to 0.5 pounds per square foot).
