Daldoss Level Goods Platform Lift
LEVEL GOODS PLATFORM LIFT
LEVEL GOODS PLATFORM LIFT
The cargo platform lift. The medium sized solution for goods and up to two persons.
Daldoss level goods help your work moving medium size loads.
Daldoss Level Goods offers the easiest solution, fast and efficient, for the transport of goods, with or without attendants in the car.
Particularly suitable to warehouses, industries, supermarkets, retail shops and any other environment where there is a need to move carts, trolleys, boxes and other material.
It can be easily installed in small areas thanks to its pit and headroom reduced to the minimum, and it’s available both as wall mounted and/or with supported structure, for indoor or outdoor installations.
INFORMATION
BRAND
Daldoss
CAR ENTRANCES
1 or 2 opposite.
TRACTION
Hydraulic with control unit placed in proximity of the shaft.
POWER SUPPLY
-220V mono phase
-Δ230V-Y400V three phase 50/60 Hz.
OPERATION
“Constant Pressure” (hold-to-run) in the car and automatic from the floor.
APPLICATIONS
Level goods is the ideal solution for industrial and commercial applications
DOWNLOAD
↓ Brochure
RATED LOAD
Up to 500 kg (with 2 persons max in the car).
FLOOR PUSHBUTTONS
Stainless steel plaque AISI 304, floor pushbuttons in stainless steel with universal operation of call and send with green light of presence of car at floor and red light for lift busy or on arrival.
CAR
Close with baked oven enamel walls RAL 7038 (pearl gray), bumper guards on the car walls, checkered aluminum floor, LED bars illumination and safety light curtain in Category 2 on each car entrance.
HEADROOM
Min. 2400 mm.
STOPS
Up to 8.
TRAVEL
Up to 17mt (it may vary depending on the model).
SPEED
Max 0.15 m/s (it may vary depending on the model).
NORMS AND REGULATIONS
-Law Decree 27 January 2010 N.17 -Machine Directive 2006/42/EC - Electromagnetic Compatibility Directive 2014/30/EU -Ministerial Decree 14 January 2008. New Technical Standards for Constructions. -CR UNI 10011 – June 1988. Steel Constructions, Instructions for the calculation, execution, testing and maintenance. -EN1090-1:2009+A1:2011 EC Marking for Structural.
MOTOR POWER
1.5 ÷ 2.2 kW (depending on the model).
PIT
Min. 150 mm (it may vary depending on the model).
CAR PUSHBUTTON
Stainless steel plaque AISI 304, floor selection pushbuttons in stainless steel activated with constant pressure. Alarm pushbutton, emergency stop, and optional key disabling car controls operations.
FLOOR DOORS
Manual with single or double panel with 180° opening baked oven enamel RAL 7038 (pearl gray) and window 70×900 mm. Internal closing handle, mechanical lock and electrical contact with removable bridge. Lower floor doors with manual resetting.
technical diagramS
DRAWINGS
