W R Meadows 1325-clear Paints
1325 CLEAR PAINTS
1325 CLEAR PAINTS
Water-Based, Wax-Based Concrete Curing Compound
1325-clear Water-based, Wax-based Concrete Curing Compound Is An Excellent Cure For Interior And Exterior And Horizontal And Vertical Concrete Surfaces.
INFORMATION
BRAND
W R Meadows
PRODUCT TYPE
Paint
SHELF LIFE
When stored indoors in original, unopened containers at temperatures between 40° - 90° F (4° - 32° C), optimum performance and best use is obtained within one year of date of manufacture.
USES
325-CLEAR is used on both interior and exterior, horizontal or vertical concrete applications, where subsequent surface treatments will not be applied.
COLLECTION
1325-Clear
TECHNICAL DATA
VOC Content: 25 g/L
APPLICATION COVERAGE
1325-CLEAR appears white in color when wet, but dries clear. It is also available with a red fugitive dye to visually aid application coverage.
SPECIFICATIONS/STANDARDS
-ASTM C309, Type 1, Class A (Type 1-D also available) -AASHTO M 148, Type 1, Class A (Type 1-D also available -Ohio DOT: 705.07 -Complies with all current federal, state, and local maximum allowable VOC requirements, including National EPA VOC Emission Standard for Architectural Coatings, LADCO, and OTCPhase I.
COVERAGE
Approximately 200 ft.2/gal. (4.9 m2/L). Coverage is approximate and may vary depending on surface finish/texture, concrete condition, climatic conditions, etc. Always apply to a test area first to determine actual coverage rate before full-scale application.
PACKAGING
- 5 Gallon (18.93 L) Pails
- 55 Gallon (208.20 L) Drums
OPTIMIZES WATER
When properly applied, it provides a premium-grade film which optimizes water retention.
FEATURES/BENEFITS
-When properly applied, provides a premium-grade film which optimizes water retention -Furnished as a ready-to-use, true water-based compound. -Produces hard, dense concrete ... minimizes hair- checking, thermal cracking, dusting, and other defects. -Enhances the functional capabilities of concrete by "sealing in" the performance assets of strength and long life.
-Offers a compressive strength significantly greater than improperly cured or uncured concrete. Increases tensile strength for greater resistance to cracking and surface crazing. -Improves resistance to abrasion and the corrosive action of salts and chemicals ... minimizes shrinkage -Applies quickly and easily with conventional commercial spray equipment.
APPLICATION
MIXING
For optimum performance, gentle mixing or agitation is recommended. CAUTION: TO AVOID FOAMING, DO NOT MIX EXCESSIVELY.
DRYING TIME
Depends on weather conditions and coverage, but will generally dry in one hour. Restrict foot traffic for at least four hours. Twelve hours is preferable.
CLEANUP
Prior to drying, equipment may be easily cleaned with soap and water. Once dried, use mineral spirits or other suitable petroleum distillate.
HEALTH AND SAFETY
Direct contact may result in mild irritation. Refer to Safety Data Sheet for complete health and safety information.
PRECAUTIONS
KEEP FROM FREEZING. Do not apply if the temperature of the concrete is less than 40º F (4º C). DO NOT MIX WITH CURES CONTAINING SOLVENT OR ADD SOLVENTS TO WATER-BASED CURES -SEPARATION WILL OCCUR. DO NOT ADD OR DILUTE WITH ANY OTHER COMPOUND. Do not use on concrete surfaces where paint, tile or other treatments will be subsequently applied.
APPLICATION METHOD
Application equipment must be clean and free of any previously used materials. May be sprayed on in one even coat with a hand or power sprayer as soon as the surface water disappears from horizontal concrete surfaces. On vertical surfaces, spray on promptly after the forms are removed. A Chapin 1949 sprayer is recommended with a spray nozzle that produces a flow of 0.5 GPM (1.9 LPM) under 40 psi (.276 MPa) of pressure.
