Plyboo Edge Grain Bamboo Plywood
EDGE GRAIN BAMBOO PLYWOOD
EDGE GRAIN BAMBOO PLYWOOD
Edge grain plywood by Plyboo has a sleek, "sliced" look and is architectural grade for better dimensional stability.
The bamboo plywood sheets can be cut and sanded with conventional woodworking equipment, and can be glued and fastened in the same manner as with wood products.
INFORMATION
BRAND
Plyboo
PRODUCT TYPE
Plywood
LEED® CREDITS
- MRc7 : Certified Wood
- MRc6 : Rapidly Renewable Materials
- ULEF, Ultra Low Emitting Formaldehyde, IEQc4.4 : Low-Emitting Materials
CERTIFICATION
If you require a copy of our Smith&Fong FSC certificate
FIRE RATING
- Fire resistance classification : Class
- Test surface burning in accordance with ASTM E 84
COLLECTION
Edge
PRODUCTION
Made in California
WEIGHT
- 3/4” x 30″ x 120″ – 80lbs per piece
- 3/4” x 48″ x 96″ – 90lbs per piece
- 1/2” x 48″ x 96″ – 65lbs per piece
- 1/4” x 48″ x 96″ – 35lbs per piece
- 1 1/2” x 30″ x 120″ – 160 lbs per piece
THICHNESS
Our edge grain bamboo veneer is manufactured either sheet-sliced or re-sawn. The thicknesses offered are 0.6mm and 2.0mm.
MATERIAL
100% bamboo
FINISH
Unfinished
DETAIL
All Plyboo bamboo veneers and bamboo plywood are unfinished. The color options for Plyboo edge grain bamboo plywood include Amber, Natural, and Chocolate. The bamboo veneer color options are Amber and Natural.
SIZE
- 38mm x 762mm x 3048mm
- 19mm x 762mm x 3048mm
- 19mm x 1219mm x 2438mm
- 12mm x 1219mm x 2438mm
- 6mm x 1219mm x 2438mm
COLORS
-Natural -Amber
WORKING WITH PLYBOO
GENERAL RULES OF USAGE
The three-ply construction, like all cross-ply constructions, are designed for greater stability. The three-ply construction is also the most popular for its versatility of application. Uses for this panel include, cabinetry, shelving, store fixtures, furniture and wall panel systems. If you have further questions about a specific use or application for PlybooStrand bamboo plywood, please feel free to contact our technical support department
CONSTRUCTION OF PLYBOOSTRAND PANELS
The most common is our three-ply construction that has been in use since 1996. This construction employs a perpendicular core running the width of the panel. The core is constructed of multiple strips of standard bamboo material. These strips are laminated into a single-piece core board. The surface plies are assembled of strand face board strips that are approximately 4 1/16” in width and are laminated side-to-side and sanded to dimension, then laminated to top and bottom completing the three-ply construction
CONSTRUCTION OF PLYBOOSTRAND MATERIAL
PlybooStrand material differs from standard Plyboo® material in the processing of the strips and the manufacture of the base material. To explain the full process would be more involved than this document allows, but a basic understanding of the material is still helpful. Strand strips are produced rough and then crushed to open up the material for better adhesive saturation. The strips are submersed in adhesive, dried, and pressed into dense blocks that are then balanced, sliced, and kiln-dried before they are ready for processing. The process to produce the PlybooStrand material from which our panels are made takes approximately 6 weeks to complete
MOISTURE AND HUMIDITY
PlybooStrand panels are manufactured to an average moisture content of 6 to 9%. However, due to environmental conditions, the product you receive may vary. It is recommended that before working a panel that a moisture reading be taken. If acclimation is necessary, this should be performed prior to working the material and should take into consideration the environment and the application at the final installation point. PlybooStrand panels, like wood products, will expand and contract with changes in relative humidity (RH). The greater the seasonal change, the greater the potential for movement
RECEIPT AND PREPARATION
All product should be inspected upon arrival to confirm the condition of the material, that there is no freight damage and that the product conforms to the order. Bamboo will naturally vary in color and this is to be expected. For this reason, all panels to be used should be color paired for best effect. If panels are to be stored prior to working, leave the panels in their protective packaging and stack horizontally.
Prior to fabrication, sheets should be checked for moisture. If the panels need to be acclimated, un-bag and stack horizontally with spacers to allow proper air circulation to occur. Consider the relative humidity (RH) and temperature of the final installation site to establish the appropriate moisture level of the panel prior to working, sealing and finishing.
