Diasen Diathonite Regularization Mortar
Diathonite Regularization Mortar
DIATHONITE REGULARIZATION MORTAR
Lime-based breathable restoration plaster and salt barrier
To prepare mechanically strengthen walls and protect against salt penetratio Diathonite Regularization should be applied directly onto the brick, block or stone of internal, external or partially underground masonry walls.
INFORMATION
ANTI- SALT AND DEHUMIDIFYING BARRIER
- Natural and ecological
- Breathable and workable
- Ideal for historical restoration
- Suitable for all cases of salinity
- Can be used indoors and outdoors.
- Product with CE marking (EN 998-1).
- Respect the thermo-hygrometric balance of the support.
BRAND
Diasen
PRODUCT TYPE
Plaster
MINIMUM THICKNESS
0.5 Cm
ASPECT
Powder
HYDRAULIC LIME
The hydraulic binder with high breathability
MINERAL AGGREGATES
Aggregates that optimize the support
ADVANTAGES
- Highly breathable
- High workability
-High mechanical resistance
- It is an excellent antisalt barrier
- Suitable for historic refurbishment and green building
- It respects the thermal-hygrometric equilibrium of the support
- Perfect compatibility with mineral finishing (water or silicate based)
- Realized with natural hydraulic lime NHL5
PRODUCTION
Made in Italy
YIELD
12 (± 15%)kg/m
MIXING
Mix Diathonite Regularization with 15-20% of clean water, 4 – 5 Lt each bag. Gradually add the powder. The mixing can be done in a concrete mixer or in a bucket (by hand or with a drill mixer at low speed) until obtaining a homogeneous mixture without lumps
STORAGE
Stored the product in well ventilated areas, away from sunlight and ice, at temperatures between +5°C and +35°C. Storage time: 12 months
MATERIALS & RESOURCES
-MRc4 – Recycled Content
-MRc5 – Regional Materials
-MRc2- Construction Waste Management -MRc6 - Rapidly Renewable Materials
PACKAGING
– 25 kg paper bags.
– Pallet: n° 48 paper bags (1200 kg).
WATER NEEDED
4-5 l per bag of 25 kg
ANTI-SALT ADDITIVES
The natural part of the barrier
APPLICATION TEMPERATURE
+5 /+35 °C
GRANULOMETRY
1230 (±10%)kg/m
MIXTURE CONSISTENCY
Sprayable
COLOR
White
SAFETY
For the handling, see product safety data sheet. During application, always use personal protection tools.
INDOOR ENVIRONMENTAL QUALITY
-IEQc3.2 - Construction Indoor Air Quality Management -Plan—Before Occupancy -IEQc4.2 - Low Emitting Materials - Paints and Coatings -IEQc11 - Mold Prevention*X
SUGGESTIONS
-Do not apply at temperature lower than +5°C and higher than +35°C -If used externally, during summer season, applythe product during the cooler hours of the day, away from sun. -Externally, do not apply with imminent threat of rainwater or ice, in condition of strong fog or withrelative humidity level higher than 70%.
CLEANING
Wash tools with water before product hardening.
STORAGE CONTAINERS
12 months in original containers and dry places
APPLICATION FIELDS
The product is used as anti salt barrier in the treatment of humidity problems (rising damp, bad thermal insulation ...), helping and enhancing the properties of the dehumidifying plaster (Diathonite Deumix). Diathonite Regularization stops the flow of hydro soluble salts into the plaster. Moreover, its application is usefull to uniform the absorption of the existing substrate, to uniform the substrate and to make a better adhesion surface for the plaster.Diathonite Regularization is suitable for bearing walls and plugging walls made of bricks, for blocks, tuff, stones and mixed structures before the application of the dehumidifying plaste
PREPARATION OF SUPPORT
-Sub-strate temperature must be comprised between +5°C and +35°C. -Sub-strate must be completely hardened, dry and resistant. -The surface must be thouroughly clean, well consolidated, without debris or detaching parts. Eventually clean with sandblasting and successive pressure wash -Remove the wall until the brick or stone. Do not apply the product over old paintings or renders. -Take off interstitial salt incrustation -It is recommended to protect frames and thresholds before apply the product