Artesive Artesive Wood Series WD-058 Bleached Ash Insulation Accessrioes
ARTESIVE WOOD SERIES WD-058 BLEACHED ASH Insulation Accessrioes
ARTESIVE WOOD SERIES WD-058 BLEACHED ASH INSULATION ACCESSRIOES
Bleached Ash
The Bleached Ash model takes a very contemporary fashion by bleaching of wood with partial coverage and partial view of the white wood.
A desired effect to give the idea that the pores of the grain we have not absorbed the color, thus obtaining a contrast very attractive and unique texture .Opaque finishing, has the grain vertically relative to the length of the coil.
INFORMATION
BRAND
Artesive
PRODUCT TYPE
Insulation Accessrioes
PRODUCTION
Made in Italy
CERTIFICATION
UNI EN 12149:1999
LINEAR MATERIAL
Kraft thickness 120 μ ± 10%
MINIMUM CLASS OF REACON TO FIRE
NPD does not fireproof material
MATERIAL (SURFACE)
Polypropylene (PVC)
THICKNESS (SURFACE)
220 μm ± 10%
ACCESSION TIME
- 20 Min from : 1700 (g / inch)
- 5 Days aer applicaon : 2700 (g / inch)
HEAT RESISTANCE
180 ° C
APPLICAON METHOD
Dry
OPMAL APPLICAON TEMPERATURE
Between 10 ° C and 30 ° C
VISCOSITY
3000-3500 (cps / 30 ° C)
WARRANTY
3 Years
CONDION OF THE SURFACE
Smooth, clean and free of debris or damaged parts that may impair proper adhesion.
CLEANING
Clean with a mild damp cloth using mild soap if necessary
DOWNLOADS
↓ Data Sheet
↓ Warranty
NARROWING MARGIN
2% ca
ADHESIVE
Permanent Acrylic
WOOD SERIES
The Artesive wood series is the perfect combination of materials, design and performance of application. This self-adhesive film made of PVC offers very special features, perfect to be used to coat surfaces such as wood, plastic, metal and smooth surfaces such as plasterboard or MDF. It’s surface has high thickness allowing a good feeling to the touch as well as sight. The grain feel and look very similar to natural wood.
APPLICABLE SURFACES
- Wood
- Plasc
- Metal
- Paper
- Glass
- Ceramics
SURFACE TYPE
Flat, vercal, slightly curved. Dining slight tension (depending on the model of the film) with use of hot air
REMOVING FILM
Using hot and / or steam air caldo.Fare sure to use an appropriate temperature.
TENSIONING MAX
About 200% depending on the model
USED WITH SPECIFIC PRIMERS FOR PVC FILMS
Yes
STORAGE
The film must be stored in environments with temperature above 5 ° C and 30 ° C, with a relave humidity of 50% ca. Duraon in the original package: 24 months, applicable to the material delivered, without having undergone transformaons. Resistance to external agents: water, alcohol, drinks (coffee, tea, wine, milk), neutral detergent, liquid soap, vinegar
CHOOSE YOUR ROLL
Choose the width you need to minimize waste and facilitate application. You can choose between the various pre-cut rolls or the customized roll by indicating in the quantity field the exact meters required. This model is available in 4 different widths. 30 cm, 60 cm, 90 cm and 122 cm.
SMALL TIPS
- If you need larger films with larger sizes, you can contact us for a specific quote.
- It is always better to apply the film lightly initially, to be sure of the correct positioning.
- If you need to make large surfaces, we suggest you to buy a small test roll, or a single roll, to verify that your imagination and color are exactly the ones you were looking for.
QUALITY AND EASY APPLICATION
Like all Artesive self-adhesive films, including this Stone series are conformable, in which heating them allows you to model and apply them easily in tricky areas such as edges or corners. The adhesive being used is not set immediately to 100%, but allows you to remove the film to be repositioned in the event of errors. The patterns and textures of the Artesive Stone series is in line with the trends of furniture of the moment. See the diagram below for some of the performance normally required by an adhesive coating for interiors. On a scale of 0 to 100 where 100 is the highest score, you can figure out which model is suitable for your use.
FEATURES
DESIGN
This texture is not smooth but embossed so even to the touch you feel a relief that gives an effect similar to the real material.
CONFORMABLE
With the change in temperature the film stretches and allows the installer to make it stick even in difficult spots such as corners or edges.
BUBBLE FREE SYSTEM
Thanks to the special composition and to the thickness of the upper, it is possible to drastically reduce the irritating air bubbles during the application.
UNIMMEDIATE FIXING
The adhesive of Artesive vinyl films does not have the bite immediately to allow the immediate detachment and repositioning on the surface.
APPLICATION
MEASUREMENT
The application of the film is usually done step by step. After taking the measurements, the necessary part is cut, leaving always a margin of tolerance. On the back of the film, a grid helps you make a precise and in-line cut.
REPOSITION
The film is repositionable at first, so do not be afraid to make mistakes. To help you first wet the surface to be treated with water, it will help you not to immediately attack the film.
CUTTING
Once cut to size, the film is still placed with the protective sheet applied on the surface, stopping it with paper tape. Starting from one side only a small part of the adhesive protection is removed and glued to the surface.
REMOVE BUBBLES
Any air bubbles can be removed with the help of a spatula. When the first piece of film is applied, the paper protection sheet is removed step by step.
APPLY
Do not remove everything, but one piece at a time, continuing to pass the spatula every time from the center to the outside removing air bubbles and any drops of water previously applied. When the application is complete remove the pieces of paper tape. Voilà, done!