Artesive Stone Series – ST-07 Red Bricks
STONE SERIES – ST-07 RED BRICKS
STONE SERIES – ST-07 RED BRICKS
The Red Bricks model has a design that incorporates the classic bricks of natural color with contrasting cement arranged in a staggered way so as to create the optical sensation of a real wall.
The new version has been improved both in terms of embossing as it is now slightly rough to the touch, and in terms of texture quality, superimposable in the 122cm width version.
It means that if you want to create a very wide wall, by purchasing the 122cm width it is possible to overlap the two lateral ends to continue the design without interruption.
Each brick measures approximately 15cm x 6cm and the distance between them is approximately 12mm. The design develops horizontally with respect to the length of the coil.
INFORMATION
BRAND
Artesive
PRODUCT TYPE
Bricks
OPTIMAL SETTING TEMPERATURE
15/30 ° C
LINEAR MATERIAL
Kraft thickness 120 μ ± 10%
MINIMUM FIRE REACTION CLASS
NPD Non-flame retardant material
MATERIAL
Polypropylene (PVC)
THICKNESS
220 μ ± 10%
STONE SERIES
The Artesive Stone series is dedicated to the self-adhesive films like stone. It is the perfect combination of materials, design and performance of application. This self-adhesive film is made of PVC which offers very special features, perfect to be used to coat surfaces such as wood, plastic, metal and smooth surfaces such as plasterboard or MDF.
REPOSITIONAL
No
ADHESIVE
Permanent Acrylic
DOWNLOADS
↓ Datasheet
↓ Warranty
SUITABLE FOR OUTDOOR USE
No
SUITABLE FOR INTERNAL USE
Yes
HEAT ADHESIVE RESISTANCE
180 ° C
SHRINKAGE MARGIN
2% approx
APPLICATION METHOD
Dry
CHOOSE YOUR ROLL
Choose the width you need to minimize waste and facilitate application. You can choose between the various pre-cut rolls or the customized roll by indicating in the quantity field the exact meters required. This model is available in 4 different widths. 30 cm, 60 cm, 90 cm and 122 cm.
SMALL TIPS
-If you need larger films with larger sizes, you can contact us for a specific quote. -It is always better to apply the film lightly initially, to be sure of the correct positioning. -If you need to make large surfaces, we suggest you to buy a small test roll, or a single roll, to verify that your imagination and color are exactly the ones you were looking for.
CERTIFICATION
UNI EN 12149: 1999
WARRANTY
3 years internal use
QUALITY AND EASY APPLICATION
Like all Artesive self-adhesive films, including this Stone series are conformable, in which heating them allows you to model and apply them easily in tricky areas such as edges or corners. The adhesive being used is not set immediately to 100%, but allows you to remove the film to be repositioned in the event of errors.
The patterns and textures of the Artesive Stone series is in line with the trends of furniture of the moment. See the diagram below for some of the performance normally required by an adhesive coating for interiors. On a scale of 0 to 100 where 100 is the highest score, you can figure out which model is suitable for your use.
FEATURES
DESIGN
This texture is not smooth but embossed so even to the touch you feel a relief that gives an effect similar to the real material.
CONFORMABLE
With the change in temperature the film stretches and allows the installer to make it stick even in difficult spots such as corners or edges.
BUBBLE FREE SYSTEM
Thanks to the special composition and to the thickness of the upper, it is possible to drastically reduce the irritating air bubbles during the application.
UNIMMEDIATE FIXING
The adhesive of Artesive vinyl films does not have the bite immediately to allow the immediate detachment and repositioning on the surface.
APPLICATION
MEASUREMENT
The application of the film is usually done step by step. After taking the measurements, the necessary part is cut, leaving always a margin of tolerance. On the back of the film, a grid helps you make a precise and in-line cut.
REPOSITION
The film is repositionable at first, so do not be afraid to make mistakes. To help you first wet the surface to be treated with water, it will help you not to immediately attack the film.
CUTTING
Once cut to size, the film is still placed with the protective sheet applied on the surface, stopping it with paper tape. Starting from one side only a small part of the adhesive protection is removed and glued to the surface.
REMOVE BUBBLES
Any air bubbles can be removed with the help of a spatula. When the first piece of film is applied, the paper protection sheet is removed step by step.
APPLY
Do not remove everything, but one piece at a time, continuing to pass the spatula every time from the center to the outside removing air bubbles and any drops of water previously applied. When the application is complete remove the pieces of paper tape. Voilà, done!
