Artesive Stone Series – St-06 Gray Bricks Wall Tiles
STONE SERIES – ST-06 GRAY BRICKS WALL TILES
STONE SERIES – ST-06 GRAY BRICKS WALL TILES
GRAY BRICKS
The new Gray Bricks model has a design that incorporates the classic bricks of the natural color with contrasting concrete arranged in a staggered way so as to create the optical sensation of a real wall.
The new version has been improved both in terms of embossing since it is now slightly wrinkled to the touch, and in terms of texture quality, which can be overlapped in the version with a width of 122cm. It means that if you want to create a very large wall, by purchasing the 122cm width you can overlap the two lateral ends to continue the drawing without interruption.
Each brick measures approximately 15cm x 6cm and the distance between them is approximately 12mm. The design develops horizontally with respect to the length of the coil.
INFORMATION
CONFORMABLE
With the change in temperature the film stretches and allows the installer to make it stick even in difficult spots such as corners or edges.
BRAND
Artesive
PRODUCT TYPE
Wall Tiles
CHOOSE YOUR ROLL
Choose the width you need to minimize waste and facilitate application. You can choose between the various pre-cut rolls or the customized roll by indicating in the quantity field the exact meters required. This model is available in 4 different widths. 30 cm, 60 cm, 90 cm and 122 cm.
SUITABLE FOR INTERNAL USE
Yes
SUITABLE FOR OUTDOOR USE
No
MINIMUM FIRE REACTION CLASS
NPD Non-flame retardant material
ADHESIVE
Permanent Acrylic
MATERIAL
Polypropylene (PVC)
HEAT ADHESIVE RESISTANCE
180 ° C
OPTIMAL SETTING TEMPERATURE
15/30 ° C
DESIGN
This texture is not smooth but embossed so even to the touch you feel a relief that gives an effect similar to the real material.
APPLICATION METHOD
Dry
LINER MATERIAL
Kraft thickness 120 μ ± 10%
DOWNLOADS
↓ Data Sheet
↓ Warranty
CERTIFICATION
UNI EN 12149: 1999
WARRANTY
3 years internal use
ROLL LENGTH
- 2.5 mt
- 5 mt
- 10 mt
THICKNESS
220 μ ± 10%
COLOR
Colorless
ROLL WIDTH
- 30 cm
- 60 cm
- 90 cm
- 122 cm
STONE SERIES
The Artesive Stone series is dedicated to the self-adhesive films like stone. It is the perfect combination of materials, design and performance of application. This self-adhesive film is made of PVC which offers very special features, perfect to be used to coat surfaces such as wood, plastic, metal and smooth surfaces such as plasterboard or MDF.
UNIMMEDIATE FIXING
The adhesive of Artesive vinyl films does not have the bite immediately to allow the immediate detachment and repositioning on the surface.
DETAIL
“Per linear meter” means that according to the quantity inserted in the cart, the footage corresponds and will always be on a single continuous roll
PERFORMANCE STONE SERIES
- Conformability
- Touch Feeling
- Bonded Seal
- Ease of Application
- Internal Use & External Use
- Suitable for Car Wrapping
- Resistance to Cleaning agents
SMALL TIPS
-If you need to make large surfaces, we suggest you to buy a small test roll, or a single roll, to verify that your imagination and color are exactly the ones you were looking for. -It is always better to apply the film lightly initially, to be sure of the correct positioning. -If you need larger films with larger sizes, you can contact us for a specific quote.
SHRINKAGE MARGIN
2% approx
REPOSITIONAL
No
QUALITY AND EASY APPLICATION
-Like all Artesive self-adhesive films, including this Stone series are conformable, in which heating them allows you to model and apply them easily in tricky areas such as edges or corners. The adhesive being used is not set immediately to 100%, but allows you to remove the film to be repositioned in the event of errors. The patterns and textures of the Artesive Stone series is in line with the trends of furniture of the moment. -See the diagram below for some of the performance normally required by an adhesive coating for interiors. On a scale of 0 to 100 where 100 is the highest score, you can figure out which model is suitable for your use.
APPLY THE SELF-ADHESIVE FILM
APPLICATION
The application of the film is usually done step by step. After taking the measurements, the necessary part is cut, leaving always a margin of tolerance. On the back of the film, a grid helps you make a precise and in-line cut.
SURFACE
The film is repositionable at first, so do not be afraid to make mistakes. To help you first wet the surface to be treated with water, it will help you not to immediately attack the film.
CUT TO SIZE
Once cut to size, the film is still placed with the protective sheet applied on the surface, stopping it with paper tape. Starting from one side only a small part of the adhesive protection is removed and glued to the surface.
REMOVED
Any air bubbles can be removed with the help of a spatula. When the first piece of film is applied, the paper protection sheet is removed step by step.
OUTSIDE REMOVING AIR
Do not remove everything, but one piece at a time, continuing to pass the spatula every time from the center to the outside removing air bubbles and any drops of water previously applied. When the application is complete remove the pieces of paper tape. Voilà, done!