Diasen Aquabond Plasters
AQUABOND PLASTERS
AQUABOND PLASTERS
Priming smooth surfaces so Diathonite plasters can be applied and achieve optimum adhesion
INFORMATION
CHARACTERISTICS
Aquabond is an adhesive primer with added aggregate granules. It can be used as a component of the Diathonite system to ensure adhesion of Diathonite over smooth surfaces. When Aquabond dries, it provides a semi-smooth (gritty) surface. Its dry film stands out for its good grip even on very smooth and waterproof mineral substrates.
BRAND
Diasen
PRODUCT TYPE
Plaster
TEMPERATURE
Value referred to a temperature of 23°C (73°F) and 50% of relative humidity
ASPECT
Liquid
COMPONENTS
One-component
CLEANING
The equipment used can be washed with water before the product hardens.
WHERE TO USE IT
Aquabond plaster primer can be used on all types of building surfaces e.g. smooth plasters and mortars, cementitious or lime-based, timber, glass, stone, metal substrates, polystyrene and cork insulating panels, plasterboard, tiled surfaces (unglazed), slated or bituminous membranes. It can be use internally and externally. Aquabond may also be used on painted surfaces if the next coat will be a normal thickness paint (i.e. not a thick textured coating).
SUBSTRATE PREPARATION
The substrate must be completely hardened (properly cured) and have sufficient strength. The surface must be thoroughly clean, dry, well consolidated and free of crumbling and loose parts.
DOWNLOADS
↓ Technical data sheet
↓ Safety data sheet
↓ Technical specification
↓ Declaration of performance EN 1504-2 (CE)
↓ Declaration of performance EN BS 1504-2 (UKCA)
PRODUCTION
Made in Italy
YIELD
0.25 kg/m²
COLOR
Water Green
QUANTITY
Applied in larger quantities
STORAGE
The product must be stored in its original, perfectly closed containers, in a well-ventilated place, away from sunlight, water and frost, at temperatures between +5°C and +35°C.
MATERIAL (CONCRETE)
Ensure that the plaster is consistent and well adhered to the substrate, otherwise provide for partial or total removal. In the case of painted plaster, ensure that the paint is well adhered to the plaster by tapping at several points on the surface. Given the wide variety of paints on the market, it is advisable to carry out a test to check the adhesion of the system. However, as with any plaster, to ensure optimal breathability and adhesion to the substrate, the existing paint should ideally be removed.
APPLICATION
– Roll
– Brush
PACKAGING
– 5 kg plastic bucket
– 20kg plastic bucket
ADHESION ON CEMENTICIOUS SUPPORT, WOOD, GLASS & METAL
> 4.0N/mm2 (excellent)
ADHESION OF THE SYSTEM AQUABOND + DIATHONITE EVOLUTION OVER CORK PANEL
85.5 N (good)
PANEL
Ensure that the panels are well fitted together and that there are no open joints. Due to the large variety of panels on the market, we recommend carrying out a system adhesion test.
ADHESION AIDS FOR PERFECT ANCHORING OF PLASTERS AND RESINS
On any type of surface, whether new or pre-existing.
- Quick drying
- Solvent-free product
- Optimize construction times
- Neither toxic nor flammable
- Elasticity and durability over time
- Excellent adhesion even on polystyrene plates
- Ready to use (the aggregates are perfectly in solution)
- Ease and speed of application (applies in one coat).
DRYING TIME
30m
SURFACE
Semi-smooth (gritty) surface.
WATER VAPOUR PERMEABILITY
µ = 788 (UNI EN ISO 7783)
METAL
Clean the surface thoroughly, removing dirt and any loose paint. If rust is present, treat the surface with a suitable anti-rust product before applying Aquabond. If the metal surface is painted, it is advisable to carry out a test to check the perfect adhesion of the system.
MIXING
Aquabond is ready to use, it is recommended to mix it before application to make the product homogeneous. In extremely hot weather conditions, you can add 5% clean water and continue mixing. Never add foreign components to the product.
WOOD
Thoroughly clean the surface by removing dust, brittle parts and loose flakes. The wood must be completely dry, well cohesive and dimensionally stable. On painted or treated wood, carry out a preliminary test to check adhesion.