Condor O-ROUND – Formwork for curved walls
O-ROUND – Formwork for curved walls
O-ROUND – FORMWORK FOR CURVED WALLS
The versatile and easily adjustable formwork for curved walls allowing the casting of curvilinear, closed or semicircular walls with a variable radius starting from 2.50m.
INFORMATION
SIZE
High productivity of large size panel (240x300cm);
BRAND
Condor
PRODUCT TYPE
Wall Formwork
LIFTING HOOK
- Cod. 25230
- Maximum load capacity: 1500 Kg
SERVICE BACKREST
Brackets cm 75 Working load 150Kg/sq.m. for centre distance 1.50m
PANELS
Modularity of panels which can be used either vertically or horizontally;
EXTERNAL PANELS
- Width : 120/ 225(cm)
- Height: 300/ 150 (cm)
INTERNAL PANELS
- Width : 115/ 215(cm)
- Height: : 300/ 15 (cm)
CONCRETE
Possibility of casting with “Self-Compacting Concrete (SCC)”;
PROFILE THICKNESS
- Height: 120mm
- Width:60mm
AVAILABILITY
Availability of undersized panels and compensation elements;
CONNECTION CLAMPS (VERTICAL/HORIZONTAL)
- Cod. 19030 Fixed Clamp
- Cod. 19080 Adjustable clamp (max 7cm)
- Cod. 19061 Adjustable clamp (max 20cm)
DOWNLOADS
↓ Data sheet
↓ Catalog
TIE RODS
DW15 and DW20 - n.4 tie rods
STEEL TYPE
-Internal steel profiles S 235-JR
-External steel profile S 355-MC (high yeld strenght steel for cold forming according to EN10149-92).
PLYWOOD
- Thickness= 18mm – 12,6 Kg/m2
- Multilayer Finnish panel with a 220/220 g/sq.m. phenolic coating.
CASTING PRESSURE
60 kN/m
Fresh concrete casting pressure according to DIN 18218 complying with the flatness tolerances according to DIN 18202 (table 3 line 7).
FEATURES
-The lightweight frame with shaped vertical tinplates and a 12cm side profile guarantees the support of the curving spindles, the coupling with all the CONDOR vertical formworks and a casting pressure equal to 60kN / sqm; -Easy adjustment of the radius obtained acting directly on the spindles, without any modification to the panel or use of any specific equipment; -Quick check of the correct radii adjustment made thanks to the use of the templates supplied; -Full modularity of the system, thanks to easy coupling of the panels both horizontally and vertically; -Compatibility with all CONDOR accessories for plumbing and casting, in compliance with safety standards;-Flexibility of use in case of multiple works with different radii.
THE SYSTEM
-The O-ROUND system is composed by a 12cm profile panels with a vertical metal frame and an 18mm phenolic plywood and the spindles to vary the radius, starting from 2.50m. -The panels are supplied straight and then adjusted on site with extreme simplicity, acting on the bending spindles. It no need for specific equipments and thanks to the easy verification of the settings through the templates supplied. -The use of the O-ROUND Formwork avoids the economic burden deriving from the use of special tailored formworks, being the system adaptable to circular walls of variable geometry and radii. -This system can be combined horizontally and vertically, preserving the same typological and constructive characteristics of the other CONDOR frame formwork systems. -The use of the same accessories ensures full compatibility among different systems.