Litokol Ottoseal S100 Silicone Sealant
OTTOSEAL S100 SILICONE SEALANT
OTTOSEAL S100 SILICONE SEALANT
Single component, acetic acid cross-linking silicone sealant. For interiors and exteriors. Excellent resistance to weathering, ageing and UV rays. Product with very low volatile organic compound emission rate.
INFORMATION
RESTRICTIONS
Product exempt from restrictions for road, sea, air and rail transport
BRAND
Litokol
PRODUCT TYPE
Sealant
ADHESION
Excellent adhesion without primer on all typical industrial and building materials
PRODUCTION
Made in Italy
USE
Interior & Exterior
RESISTANCE
Excellent resistance to bad weather, aging and UV rays
FIELDS OF APPLICATION
- Sealing of profiled glass.
- Bonding and insulation of glass elements.
- Sealing of expansion joints on floors and façades.
- Expansion joints and connecting joints in healthcare environments.
CONSISTENCY OF MIX
Thixotropic Paste
SPECIFIC GRAVITY
1.00 kg/dm3
SURFACE
Exceptionally Smooth Surface
POLYMERISATION
Acetic acid cross-linking
PACKAGING
300 ml cartridge - Box with 20 pcs
SETTING IN 24 HOURS
2-3 mm
ADVANTAGES
- Flexibility
- Waterproof
- Resistant to mold and bacteria
CERTIFICATIONS & SUMMARY
PREPARATION OF SUBSTRATES
The surfaces to be grouted or bonded must be perfectly clean, dry and free of dust, grease, oil and old paint. Cleaning of non-porous surfaces: cleaning with OTTO Cleaner T (drying time approximately 1 minute) and a clean, lint- free rag. Cleaning of porous surfaces: mechanically clean the surfaces, e.g. with a steel brush or single disc machine, to remove any loose particles.
VOLATILE ORGANIC COMPOUND
Product with very low volatile organic compound (VOC) emission rate. Complies with class EC1PLUS according to the EMICODE protocol and class A+ (Émission dans l’air intérieur - French Regulations)
TEMPERATURES
-Ready for use : 5 days at T=+23°C
-Application temperatures : From +5°C to +35°C
-Temperature of use From : -40°C to +180°C
-Set to light foot traffic : 24 hours at T=+23°C
-Recommended application temperatures : From +15°C to +25°C
FILM-FORMING TIME
Approx. 20 minutes
DOWNLOAD
↓ Data Sheet
APPLICATIONS
-Avoid contact with solvents during cross-linking. -The joints must be finished within the grout open time. -The ideal operating temperature for the substrate and grout is between 15°C and 25°C. -Once opened, the packages must be used in a relatively short time. -Insert the cartridge in a manual or air gun (with telescopic piston) and extrude the adhesive grout, being careful to avoid the entrainment of air. -Given the many factors influencing the workability and application of the product, the user should always perform a test application. -Remove the top part of the threaded part of the cartridge, screw in the plastic nozzle and cut it to the right angle depending on the desired diameter and profile.