Vmzinc Standing Seam For Roofing
STANDING SEAM FOR ROOFING
STANDING SEAM FOR ROOFING
Standing seam is a double folded seam. The use of profiling and seaming machines for the closure of longitudinal seam joints significantly reduces installation time.
The low height of the seams (25 or 32 mm) contributes to the modernity, lightness and regularity of the roof and facade, while highlighting its architectural purpose.
INFORMATION
BRAND
Vmzinc
PRODUCT TYPE
Panel
LENGTH
10000 mm
THICKNESS
0.7 mm
DESIGN
When dealing with more complex designs this system presents a more technologically advanced appearance.
SEAM
Double Folded Seam
SLOP
Minimum slope 15° (25%)
DOWNLOAD
↓ General advantages of Zinc
AREAS OF APPLICATION
All types of buildings : commercial, public buildings, collective and individual housing.
SURFACE
The Standing seam technique is particularly suitable for very large roof and facade surfaces and for structures located in regions of harsh climate, which are often subject to strong winds, heavy rain and snowfall (mountain or continental climate).
ADVANTAGES
-Fast and easy installation making it a cost effective solution -Maximum wind resistance -Suitable for low to high hygrometry -Traditional system widely used throughout the world
INSTALLATION
-Lay the panel on the structure : The L profile of the preceding panel and the clips that have been fastened to the panel and fixed to the structure are covered by the U of the next panel, avoiding stresses and lateral traction.
-Number of clips for roofing depends on the climate zone.
-Transversal junctions : When the length of the roof slope exceeds the maximum recommended length, it is necessary to join the sheets using transversal junctions. Several techniques exist depending on the pitch of the roof.
FINISHES
ALL FINISHES
