Cimento Rio Terà Wall & Flooring

RIO TERÀ WALL & FLOORING 

These floor coatings are easy to install and guarantee the materiality and durability of classic concrete, through a considerably reduced weight. 

CIMENTO® RIO TERÀ slabs are a CIMENTO® product designed to allow the covering of existing floors. The slabs are composed of a cement conglomerate to which a fiberglass net is added. CIMENTO® RIO TERÀ is an incombustible product.

DOWNLOADS

↓ Data Sheet
↓ Catalog

APPLICATION

- Public 
- Private

FINISHES AND AVAILABLE COLORS 

Cimento® rio terà slabs are available in a wide range of standard colors, which are obtained with the use of natural oxide-based pigments. These Natural pigments allow the product to achieve high color stability.

STORAGE 

-Protect edges and corners from knocks with special protections to avoid possible chipping -Protect the sheet from contacts with staining substances, blades, and sharp objects, or scratches that could damage the CIMENTO® finish by storing it in the appropriate packaging. -Store the slabs on a flat, levelled, and dry surface, ensuring a homogeneous support over the entire surface. -It is possible to stack packages of the same size. Do not overlap the packaging with other materials that may damage the packaging or the sheets.

INSTALLATION 

-The installation must be carried out by personnel specialized in the laying of floors, anchoring the panels to the underlying structure (screed or pre-existing flooring) with the use of specific adhesives and following the instructions specifically indicated in the respective technical data sheets. -It is strongly recommended to apply suitable protective systems, such as rubber pads or felt pads, under the bases of all furnishing elements, depending on the required sliding needs. -The cimento® rio terà slab can be easily worked with the usual tools, it is recommended to use blades, discs, abrasives, etc. In suitable material (eg Diamond blades).

CLEANING E MAINTENANCE 

-Do not use chemicals, abrasive cleaners, solvents, and polishing products. The CIMENTO® surface is treated with a protective system that prevents the penetration of dirt, be it dry, wet, or greasy, and facilitates cleaning operations.
-However, the characteristic coexistence of smooth and porous parts requires some simple precautions during ordinary cleaning. It is important to prevent dirt and deposits from being moved and accumulating in the porous portions, especially in the case of moist or greasy substances.
-For routine maintenance we recommend the following operations, to be carried out in the specified : 

1. Preliminarily remove all dry deposits with a vacuum cleaner equipped with a soft bristle brush, to remove dust and solid residues from both smooth and porous areas of the surface;
2. Rub the surface with a dry microfibre cloth or moistened with water, then dry, if necessary, with an additional clean and dry microfibre cloth to avoid leaving marks;
3. If the surface comes into contact with staining substances, act on the affected area with a cloth moistened with ammonia solutions or similar products (avoiding degreasers that require abundant rinsing) then dry with a clean, dry cloth. Do not use aggressive acid-based, solvent-based, or abrasive agents.