Gobbetto Dega Brek Resin
DEGA BREK RESIN
DEGA BREK RESIN
Dega Brek is a transparent, glossy or matt finish, to protect any surface and coating of the Dega line.
Non-toxic and solvent-free, exceptional resistance to scratch, wear and yellowing. Suitable for residential and contractor.
Available in the one-component or two-component version (A+B), glossy or matt.
INFORMATION
TIME OF STOCKING
-One : 12 months about
-Two : 12 mounth at room-temperature and in closed wrappings
PRODUCTION
Made in Italy
OUT OF DUST
30 min. at 20°C
BRAND
Gobbetto
PRODUCT TYPE
Resins
TEMPERATURE LIMIT OF EXERCISE
- 10° C. + 70°C.
SPECIFIC WEIGHT
0.9 Kg./dmc. ca
APPLICATION
-One : Pennello, rullo o a spruzzo
-Two : Brush, Roll, Spry
EMPLOYMENTS (ONE-COMPONENT)
To protect and to dress again surfaces of various nature. Excellent for the protection of floors line dega. Suitable for residences, shops, Showroom etc.Pleasant the aesthetical finish.
EMPLOYMENTS (TWO-COMPONENT)
Protect and cover different surfaces. Excellent for the protection of dega line floors. Indicate for residences, shops, showrooms, etc. Pleasant the aesthetic finish.
COLORS
-One-component Dega Brek : 18 hour : Transparent
-Two-component Dega Brek : Like milk
COMPLETE HARDENING
-One-component Dega Brek : 18 hour
-Two-component Dega Brek : 24 hours at 20° C
PACKAGING
1 kg, 5kg, 10kg
LEAST TEMPERATURE
Least temperature of application : +15° C.
FEATURES
-The product is a precatalitic monocomponent, ready to the use. To mix before the use to apply by roll, brush or spray. It is advisable to stretch 2/3 distance hands of 2/3 hours. -Accurately mixed the product with 10 parts of component a and 1 part of component b. To apply within 1 hour by the mixed with roll, brush or spry. It is advisable laying two hands after 2/3 hour one after the other. It is possible water down with 2-3% to fluidificate and facilitate the laying.
QUANTITY
-One-component Dega Brek | Average yeld 0.250 kg/mq for two coats. Available in 1kg, 5kg, 10kg size packs. -Two-component Dega Brek | Average yeld 0.250 kg/mq for two coats. Available ( kit A+B) in 5.5kg, 11kg size pack.
USE
-One-component Dega Brek: ready to use one-component product. -Two-component Dega Brek: mix thoroughly A and B ( mixing ratio by weight is 1 part component A and 0.1 component B). -Apply by roller, brush or spray. It is advisable to apply 2-3 coats a couple of hours apart.
SURRENDER FOR HAND
100-150gr/mq. in operation of the porosity of the support
WRAPPINGS - TWO-COMPONENT
Kit of lt. 5 + 0,5 ; Kit of lt. 10 + 1
