Gobbetto Dega Stucco Resin Plasters
DEGA STUCCO RESIN Plasters
DEGA STUCCO RESIN PLASTERS
Resin plaster for spatulates and textural effect
Single-component resin plaster used for general surface leveling: cement, plaster, wood, linoleum, ceramic, stoneware for residential and contractor.
Suitable for vertical layering, Dega Stucco is a non-toxic product obtained by mixing polymers with quartz and natural siliceous.
INFORMATION
BRAND
Gobbetto
PRODUCT TYPE
Resins Plasters
PRODUCTION
Made in Italy
TEMPERATURE LIMIT OF EXERCISE
- 30°C; + 60°C
PACKAGINGS
6 Kg. – 25 Kg.
QUANTITY
Yield is closely linked to project and surface. For spatulate or floors of the Dega line, average quantity is 3 kg/ sqm with 2 – 3 mm thickness. Available in 3kg, 6kg, and 25kg size packs.
DESICCATION AT 20° C
Out dust 30min; dry: in operation of the applied thickness, ex: 2 mm. 4 hours about
TIME OF WORKING
In operation to the environmental temperature about 30min
TIME OF STOCKING
8 month about at 20°c – note: it fears the cold
PREPARATION OF THE FUND
The surface of application must result cleaning up and dry. Possible precedents covering coverings, must have removed and brushed, as also all the incongruous parts of the support in concrete.
APPLICATION
Least temperature of application : + 5° C
USE
Carefully clean the surface to treat; apply Dega Primer for anchoring, followed by the product, laid out with a smooth spatula. Dega Stucco can be colored with universal pigments or can be used neutral as a base for any decoration using Dega Primer, colours and powders. Finish with 2/3 coats of transparent protective resin.
FEATURES
Dega Stucco is a product in paste, without solvents (nontoxic), mono-component of a synthetic modified copolymeric base resins, loaded with pigments, fibrous and quartz-based lamellar charges with medium and controlled granulometry. It is a thixotropic product and therefore it can also be used for vertical applications.
EMPLOYMENTS
- The product, supplied in the various colors, is usable for the restoration, the maintenance and the improvement; for located interventions or general of old floors broken up in cement, plaster, asphalt, gres, linoleum, wood, doesn't notch the polystyrene.
- For: stores, mechanical shops, sheds generally and for employments in civil housebuilding also on plasters. Dega stucco is the base for dega spatolato resin floorings.
CONSUMPTION
It is tightly tied to the type of intervention effected on the support. For trimming middle consumption of kg. 1-1, 200 about to the mm / sqm .
APPLICATION
- To preventively stretch on the surface to treat a hand leading dega primer and leave to dry.
- Apply therefore in a millimeter trimming, through the use of spatula for plasters, Dega Stucco.
- When the spread out layer will be dry, we will proceed to a further trimming of end with Dega Stucco, taking care of to eliminate dribbles or superficial incongruities.
- Hardened the product it proceeds to the refinement with correspondence. To this point, a monolithic smooth surface and coplanar is gotten.
- It is possible to aesthetically finish up such surface employing the treatments Dega Plastic, Dega Beta, Dega Brek and Floor Plus, according to the demands of use of the dressed again part.
