Novacolor Huelva Wallpaper
HUELVA WALLPAPER
HUELVA WALLPAPER
The Be Grateful Wall Paper collection is a journey through different landscapes and cultures.
The sinuous pattern of 'Huelva' rediscovers the Spanish vineyards in the city of the same name. Full, saturated colours, enhanced by gold outlines.
A port city situated between the estuaries of two rivers, the Río Odiel and the Río Tinto, Huelva has ancient origins and still holds close to its heart the memory of the extraordinary seafaring feat of Christopher Columbus, whose famous expedition to the Indies ended up discovering America and changing the course of history.
Many of the events leading up to the historic undertaking took place here and it is therefore hardly surprising that almost all the most interesting attractions in and around the city are linked to the famous Genoa-born navigator.
The vineyards of Andalusia are distinguished by their winding, frequently interrupted curves and, like these vineyards, Huelvais is an eclectic city not yet spoilt by mass tourism
INFORMATION
WALLPAPER PASTE
250 g/sq.m.
PACKAGING
5 kg packages
WORKING TIME
Approx. 45 min. at 20°C depending on the materials used and the conditions of use.
SPECIFIC WEIGHT
Approx. 1.03 g/cm3
SOLUTION APPEARANCE
Opaque-white
PASTE
Do not apply in the presence of rising damp and in humid environments. When applying in kitchens, make sure that there is no direct contact with water and that there is adequate ventilation.
COMPOSITION
- 45% wood fibre
- 15% polyester
- 20% binder
- 20% inert minerals
Composition:DOWNLOAD
↓ WallPaper_En
↓ Wallpaper Paste_En
INDOOR AIR QUALITY
A Classification
REACTION TO FIRE EN 13501-1
Class B s1 d0
CE MARKING
According to EN15102:2007+A1:2011
PRODUCT CONSISTENCY
Paste
MATERIAL TYPE
Non-woven Fabric
PRECAUTIONS
When wallpapering, especially in dark colours, take special care to ensure that the edges are perfectly matched to prevent the substrate being visible. Do not apply on fresh backgrounds that tend to be alkaline. Allow adequate curing time, generally four weeks.
COLORS
VOC CONTENT ACCORDING TO DIR. 2004/42/EC
<1 g/l
RECOMMENDATIONS
Ambient and surface conditions: Ambient temperature: 10°C - 25°C Ambient relative humidity: < 60% Background temperature: 10°C - 25°C Background humidity: < 5%. Do not apply under direct sunlight or onto overheated surfaces (even if they are already in the shade). Best visual results are obtained by using all rolls from the same production batch. Small differences may be noticed when using different production batches. For the correct use of the abov
BRAND
Novacolor
PRODUCT TYPE
Wallpapaer
MATCHING PALETTE
STORAGE LIFE CONDITIONS
Store the rolls in their original unopened packaging at appropriate temperature and humidity conditions. Use the product according to current hygiene and safety regulations. Do not dispose of residues into drains, water courses or on the ground; after use, do not dispose of containers in the environment. Allow residues to dry thoroughly and treat them as special waste. Keep out of the reach of children. If swallowed, seek medical advice immediately. For further information, see safety data sheet.
EQUIPMENT CLEANING
With water, immediately after use
CONSUMPTION
WallPaper: 170-180 g/m2/based on P.V.A. dispersion.
TECHNICAL INFORMATION
| ITEM CODE | NAME/DESIGN | WIDTH ROLL (CM) | LENGTH ROLL (M) | VERTICAL REPETITION (CM) | HORIZONTAL REPETITION (CM) | WEIGHT (G) |
|---|---|---|---|---|---|---|
| NW07 | WallPaper Huelva White Wine | 68.5 | 10.05 | 61.0 | 68.5 | 130 |
| NW08 | WallPaper Huelva Black Wine | 68.5 | 10.05 | 61.0 | 68.5 | 130 |
| NW09 | WallPaper Huelva Red Wine | 68.5 | 10.05 | 61.0 | 68.5 | 130 |
BACKGROUND PREPARATION AND APPLICATION
(Referred to environmental conditions T=25° C, RH=60%) The surface must be dry, stable and free of separating agents (dust, grease, etc.). It is necessary to first remove old wallpaper, paint and damaged plaster. Sandy, dusty and highly absorbent surfaces must be previously treated with Decofix, water-based consolidating fixative.
-With smooth wallpaper supported by paper and vinyl wallpaper supported by T.N.T. paper, the adhesive can be applied on the back of the wallpaper, directly with a brush or roller. After a short time of wetting, the paper is applied onto the wall, placing it edge to edge or overlapping, and is rolled with a rubber roller, making the air escape completely. -For heavy vinyl wall coverings or those supported by vinyl rather than paper, follow the procedure described above, taking care not to allow the adhesive to react for more than 5 minutes and, if necessary, to apply a small amount to the inner edge (in the case of edge-to-edge application).
-For the adhesion of fabric-background textiles and PVC, glass fabrics, Wallpaper Paste is applied directly to the wall using a pile roller; then, the coating is applied by pressing it from the centre towards the corners. In all cases, smears of excess adhesive must be removed as quickly as possible with a clean sponge dampened with (preferably warm) water.
WALLPAPER LAYING
Check that the paper rolls are not damaged and that the designs and colourings are correct. Remove the plates of the electrical switches and sockets. Remove the skirting board and coping (frame-covers) of doors and windows. Draw, in the blind corner (behind the door), reference marks on the wall. Using a tape measure, draw a smaller width (3-5 cm) of the sheet on the wall, making several marks starting from the top downwards.
Lower the plumb-line and make marks on the wall. Measure the height of the wall. Check for pattern repetition, then cut the lengths according to wall height, leaving an excess of 5-8 cm, at the top and bottom, for trimming. Use roller to evenly apply WallPaper Paste, unthinned, to a portion of the surface equal in width to the sheet of WallPaper. Use a brush to apply the adhesive to bond the WallPaper Paste, working from the centre towards the outside of the sheet.
Make sure the adhesive is well distributed around the edges, but avoid it coming into contact with the side of the paper that has the pattern. In they accidentally come into contact, use a damp sponge to clean and remove the adhesive immediately, then dry with a white cotton cloth.
Lay the sheet onto the surface to cover, positioning it correctly according to the marks and drawing. Use a plastic wallpaper spatula to pass over the paper again to release any trapped air. Promptly remove any spills/excess of adhesive! Continue until the surface to cover is completed. Drying time: about 24 hours depending on the type of substrate, its absorption rate, and environmental conditions.