Gobbetto Kristal® Stucco Plaster
KRISTAL® STUCCO PLASTER
KRISTAL® STUCCO PLASTER
Fine resin-based plaster
One-component, non-toxic fine plaster, based on resin, stone and natural silica.
Kristal® Stucco is a versatile product to obtain fine, smooth and materic surfaces and decorative texture.
Suitable also for vertical applications, can be neutral or colored with acrylic pigments or universal dyes.
information
SURRENDER
Tightly depending on the type of intervention effected on the support. For trimming: middle consumption of about Kg.1-1,2 for 1 mm / sqm
BRAND
Gobbetto
PRODUCT TYPE
Plaster
HARDENING
About 4 hours
TEMPERATURE LIMIT OF EXERCISE
- 30°C + 60°C
AVAILABLE
Available (A + B kit) in 1.5 kg, 3 kg and 18 kg size packs.
TIME OF STOCKING
About 12 months – Note: it is not coldproof
PREPARATION OF THE EXISTING GROUND
the surface of application must result cleaning up and dry. Specific preparations will be valued according to the existing ground. To sanding and to apply a hand of Dega Plast Primer before laying KRISTAL STUCCO.
DETAIL
Kristal stucco is a paste product, without solvents (nontoxic), monocomponent of synthetic modified copolimeric base resins, loaded with pigments, loaded lamellar and quartzifer fibrous elements. It is a tixotropic product and therefore it can also be used for vertical applications. It gives to the surface a plain and smooth look.
DESICCATION AT 20° C
Out dust: 30'; dry: in operation of the applied thickness, es: for 2 mm. about 4 h
SPECIFIC WEIGHT
1.6 Kg./Lt.
WRAPPINGS
1 Kg. – 3 Kg. – 10 kg - 25 kg
QUANTITY
Quantity varies according to thickness: for 1 mm thickness, average quantity is 1.2-1.5 kg/mq.
DOWNLOAD
↓ Technical data
TIME OF WORKING
Operating in environment temperature about 30’
USE
Clean surface and apply Dega Primer to improve adherence. Alternatively dilute a part in Kristal® Stucco. Once dry, dry-sand and proceed to apply another level of Kristal® Stucco. Apply Dega Brek as protection finish.
APPLICATION
-Previously apply a hand of dega plast primer and let dry. Subsequently apply kristal stucco in a millimetric trimming, through the use of a smooth spatula. Once the applied layer is dry, we will proceed with a further fine trimming of kristal stucco, removing smears or superficial incongruities. -Once hardened, it must be subsequently refined with sanding. -To this point, a planar and smooth surface is obtained. To obtain thicknesses of 2-3 mm, it’s advisable to apply a first hand of dega plast stucco and two trimmings of kristal stucco. -It’s possible to aesthetically refine the surface with various decorations. The protective finishing can be done using dega gamma eco/tr, dega brek, gel coat or poliepo.
