Ruregold Mx-cp Lime Plaster
MX-CP LIME PLASTER
MX-CP LIME PLASTER
Pure natural hydraulic lime (NHL 3.5) based mortar for the structural restoration of masonry
MX-CP Lime is a pure natural hydraulic lime (NHL 3.5) premix mortar for the restoration of masonry, breathable and compatible with any masonry support. After adding water, the mix is highly adhesive to masonry, tuff, and stone
It is durable, and suitable for repairs and structural plasters. The product is provided in ready-mixed bags: just add water to obtain a mix that can be applied by hand or with traditional plastering machines (e.g. PFT G4).
The porosity of the finished product is such as to enable adequate water vapor permeability. The mortar is highly resistant to aggressive agents.
INFORMATION
BRAND
Ruregold
PRODUCT TYPPE
Plaster
WATER PER 25 KG BAG
About 5 Liters
FORMAT
Powder
WATER ABSORPTION (EN 1015-18)
W1
FEATURES
Pure natural hydraulic lime (NHL 3.5) based mortar for the structural restoration of masonry, construction of structural plasters, and the preparation of the substrate for the application of structural reinforcements
APPLY
Apply in a maximum thickness of 2 cm for a single coat and not less than 5 mm. Higher thicknesses must be realized in several layers, waiting for the previous layer to dry before applying the next one.
GRANULOMETRY
0-2.5 mm
APPLICATION TEMPERATURE
From +5°c to +35°c
COMPRESSIVE STRENGTH 28 DAYS (EN 998-1 CS IV AND 998-2)
> 15 N/mrn2
MINERAL NATURE OF THE AGGREGATE
Silicon Carbide
PROPERTIES OF THE SYSTEM
-Highly compatible with historical masonry. -Eco-friendly hydraulic binder. -Excellent adherence to masonry. -High breathability. -Ease and speed of application and finishing.
COMPLIES WITH EN 998-1 AND EN 998-2
MX-CP Lime meets the requirements of the EN 998-1 Standard for internal/external plasters for general use (GP).
THICKNESS
15 mm
THICKNESS PER LAYER
20 mm
DENSITY OF HARDENED MORTAR (DRY; EN 101510)
Approx. 1600 kg/m3
DENSITY OF FRESH MORTAR (EN 1015-6)
Approx. 1750 kg/m3
CHARACTERISTICS
- Wet supports
- Ecological
- Easy to install
- Compatible
with masonry
ADHESION TO BRICK SUPPORT
> 1 N/mm2
FLAME RESISTANCE (D.M. 10/03/2005)
Euroclass Al (incombustible)
THERMAL CONDUCTIVITY/DENSITY (FN 1745)
0.67 W/mK (tabulated data)
PERMEABILITY
Water vapor permeability (en 1015-19) : μ<15
FIELDS OF APPLICATION
-Renovation of degraded walls. -Structural plasters reinforced with glass or steel fibers for the reinforcement of infill walls. -Reinforcement of vaults with outer layers reinforced with glass or steel fibers. -Preparation of the substrate on masonry elements (brick, tuff, stone) for the application of composite structural reinforcements. -Reconstruction of masonry with the “like for like” replacement technique. -Consolidation of existing walls with repointing interventions.
PACKAGE
25 kg bags on 1,500 kg pallets
DOWNLOAD
↓ Data Sheet
RESISTANCE TO FREEZING AND THAWING (EN 998-1)
NPD
YIELD
Approx. 14.5 kg/m2/cm of thickness