Winklerchimica Winkler One Resins
Winkler ONE resins
WINKLER ONE RESINS
Winkler ONE is a single component colored liquid waterproofing for roof membrane, specifically developed for applications under extreme conditions.
Infact we sell this product from Canada to Arab Emirates providing to the customer a solution in any wheater conditions, doesn’t matter if the substrate is wet, thanks to its formula, ONE is able to evaporate the water also after the painting.
It is a fast curing product that resist at high and low temperature remaining stable at thermal shocks. It tolerates precipitations in a short period of time after its application.
Although not fully cured, the product is rain-proofed and after few hours from its application it is completely out of rain. The need of new products and solutions is detected and studied by the R&D personal, mainly trough a direct team work on the building sites.
information
APPEARANCE
Fluid paste
RESISTANCE TO UV RAYS
Excellent
ONE IS THE SOLUTION!
-Winkler ONE is the result of 7 years R&D by top professionals in the engineering and chemical fields -The average roofer loses approx. 30% of his potential yearly income because he cannot easily waterproof during wintertime
COLORS
- White
- Grey
- Red
- Terracotta
PRODUCT TYPE
Resins
BRAND
Winklerchimica
IT CAN BE APPLIED WITH
- Brush
- Flat trowel
- Short haired roller
- Airless spray gun
STORAGE
The product in its undamaged packaging can be store for 12 months. No frost-proof. Store at temperatures between +5°C e +35°C.
RESISTANCE TO NEGATIVE COUNTER-PESSURE
4 bar
RESISTANCE
Durability and High Mechanical Resistance
DOWNLOADS
↓ Data Sheet
↓ Brochure
FEATURES
- Ready to use
- Long Pot Life
- VOC Zero
- No Primer Needed
- UV Rays
- Water stagnation
- Applicable on Metal
- Applicable in wet condition
- Applicable in extreme conditions (0ºC or 32ºF and rising)
PACKAGING
1 kg pail – 1 box = 15 pcs 5 – 20 Kg pail
CONSUMPTION
1.7-1.9 kg/m² in two coats, with one mat in between
PRODUCTION
Made in Italy
PERMEABILITY CLASS
SD 1 (>0.5 <2)
RESISTANCE TO POSITIVE PRESSURE
6 bar
TOOL MAINTENANCE
Clean tools with denatured ethyl alcohol if the product is still wet. Mechanically remove the product if already dry.
IT CAN BE USED ON
- Flat roofs & Metal roofs recover
- Balconies or decks
- Areas with moisture damages, including those with foot traffic
- Concrete, Concrete blocks & Fibered-cement boards
- Green concrete (cured at least 7 days at minimum +15ºC - 59°F)
- Ceramic tiled surfaces
- Masonry, Asphalt shingles
- Plywood, Wood & Metal
- BUR cap sheets or modified bituminous membranes (oxidized minimum 180 days if smooth)
APPLICATION TEMPERATURE RANGE
From 0°c To +45°c
ROOFING LIQUID MEMBRANE WINKLER ONE
Solvent free, no need for primer, breathable and rainproof after only 2 hours at 68°f and 5 hours at 32°f.
CLEANING
Clean all substrate surfaces thoroughly to eliminate dirt, dust, and loose materials, any form of oil or grease and foreign or bonding-proof matters. There is no need for the substrate surface to be dry, but ponding water shall be removed prior to the application of ONE. After thoroughly cleaning the surface to be treated, apply ONE (with a consumption of 0.70 gallons/sq.ft. - 400 g / m²) evenly. Immediately lay ONE MAT (90g/m² non-woven reinforcement), by using a spiked roller, and drown it with other 1.23-1.58 gallons/sq.ft.(700-900 g/m²) of ONE. The use of the bubble-breaker roller after the application of the second coat is always recommended. Wait for the time required for the application of the 2nd coat (see temperature table) and complete the application with the remaining 1.05-1.23 gallons/sq.ft.(600-700 g/m²) provided.
USEFUL BOARDS
-DO NOT dilute -Not frost-proof -Apply BC SEAL BAND (Self-Adhesive Butyl Tape) at wall to floor type corners, balcony terminations, around skylights or other alike penetrations.- Use BC SEAL PAD (Self-Adhesive Butyl Square Pad) around tubes, vent pipes, drains, etc. -In case the substrate is damp, first apply a skim coat of ONE, prior to the application of any butyl accessory.-After the product dries, resume the normal application of the butyl accessories. -Control cuts, contraction and/or most structural joints will be sealed, using the waterproofing elastic band WINJOINT BAND as follow: -Ensure the surface to be treated is clean. -Over the clean substrate apply ONE in two stripes 5 cm wide along each side of the joint, without covering the joint line. -Immediately place WINJOINT BAND over the wet stripes of ONE (the central part of the band will cover the joint line and the lateral wings of the band will be embedded onto the wet stripes of ONE. -After the product dries, cover the lateral wings of the WINJOINT BAND with a skim film of ONE.