Winkler Wingum Plus H2o Reflex Rapid
WINGUM PLUS H2O REFLEX RAPID
WINGUM PLUS H2O REFLEX RAPID
Compliant With The Etag 005 Guideline, Liquids Applied Roof Waterproofing Kits
Liquid waterproofing, elastomeric, white, reflective, water-based, fast drying, highly durable and resistant, capable of reducing the temperature of the treated surface by up to 50%.
It guarantees resistance to water stagnation and can also be used on large surfaces.
Its quick drying makes it protected from the rain after only a few hours, making possible to start and finish the work in a single day.
Formulated for the protection and waterproofing of highly irradiated concrete or fiber cement roofs and for the maintenance of bituminous membranes (oxidized for at least 180 days after laying), including slated material. For the protection of the reflective surface, it is recommended to apply WINCLEAN, transparent protective cleaner, with low-dirt pick-up.
information
CATEGORY
Liquid, paste and cement-base waterproofing products Innovations
PRODUCTION
Made in Italy
SHELF LIFE
12 Months
TEMPERATURES
+5°C and +35°C
DOWNLOAD
↓ Declaration of Performance
PACKAGING
5 - 10 - 20 kg Buckets
IN TWO COATS
- 1.1 - 1.3 kg/m² -1.7 - 1.9 kg/m²
PLACE
Cool And Dry
COLORS
-White -Grey -Red -Green
HARMONISED TECHNICAL SPECIFICATION
ETAG 005:2004 : Liquid applied roof waterproofing kits. Level of use categories according to ETAG 005 part 1
ACCESSORIES
- Bc Seal Band
- Bc Seal Pad
- Winjoint Foam
- Winjoint Seal
- Winjoint Band
- Wintechno Mat
- Winseal.
CERTIFICATION
WINLIVEL RAPID
-1mm to 15mm -1mm to 20mm
RESISTANCE
Durability and High Mechanical Resistance
STORAGE
The product, in its undamaged packaging and stored in a cool and dry place, has a shelf-life of 12 months. Store at temperatures between + 5°C and + 35°C.
USEFUL ADVICES
-Carefully clean the support to remove dust, crumbly parts, foreign or non-stick substances. The application must take place on a dry surface. It is always recommended to check for the presence of hidden humidity, to avoid flaking or bubbles, due to vapor pressure.-Provide periodic cleaning of the treated surfaces (approximately every two years) and the reapplication of WINCLEAN. For floor grinding use WINLIVEL self-levelling, for irregularities from 1mm to 15mm or WINLIVEL RAPID self-levelling for irregularities from 1mm to 20mm. -To create the new screed, use WINPLAN 370, a quick-drying screed or WINPLAN PRO, a quick-drying screed with low water absorption. Apply at temperatures between +5°C +35°C.
APPLICATION
It can be applied with a spatula, roller, brush, flat brush, or airless pump. On particularly chalking surfaces, a prior application of the consolidating agent WINFIX CONCRETE is recommended. Apply the product in two coats. To obtain a homogeneous and ideal thickness for waterproofing, it is recommended to always place between the two coats our reinforcement sheet WINTECHNO MAT.
For laying on substrates with irregular geometry (for example corrugated sheet metal), it is possible to apply the product in two coats without the interposition of WINTECHNO MAT reinforcement.
The system provides the application, on the perimeter edges, of the BC SEAL BAND waterproof adhesive strip. For pipes, drainpipes, ventilation pipes etc, use BC SEAL PAD waterproof self-adhesive square, in combination with BC SEAL BAND. Joints up to 1cm wide, must be sealed with WINJOINT BAND joint cover strip.
If the width of the joints is greater than 1cm, they must be sealed using a system consisting of WINJOINT FOAM (compressible joint bottom), WINJOINT SEAL (polyurethane sealant) and WINJOINT BAND.
DECLARED PERFORMANCE
| ESSENTIAL CHARACTERISTICS | PERFORMANCES |
|---|---|
| Working Life | W 2 |
| Climatic Zone | S |
| Imposed Loads | P 1 to P 3 |
| Roof slopes | S 1 to S 4 |
| Lowest surface Temperature | TL 3 |
| Highest surface Temperature | TH 3 |
| Reaction to fire | Class E |
| Release of Hazardous Substances | See MSDS |