Bemo Rainscreen Facade Systems
RAINSCREEN FACADE SYSTEMS
RAINSCREEN FACADE SYSTEMS
Rainscreen systems from BEMO for all requirements of rainscreen façades
Structurally safe with maximum protection against moisture damage
Systems are the interaction of several components that are perfectly designed and coordinated with each other. The interaction of matching components ensures safety and traceability, thoroughly tested and documented performance criteria. A rainscreen system (= rear-ventilated façade) is such a system for rainscreen façades: optimal in terms of structure, statically safe, optically flexible to design and adaptable to almost all requirements.
FEATURES
FAÇADE BRACKET TEKOFIX-A++ FOR MAXIMUM RELIABILITY OF RAINSCREEN FAÇADES
The unique structure sets new standards in the area of thermal bridges
A unique bracket that sets new standards. TEKOFIX-A++ façade bracket guarantees the highest fire protection, the lowest thermal bridge impact and easy installation of rainscreen façades.
Due to non-combustible components such as aluminium and steel, the façade bracket has the highest fire resistance rating and can also be used for rainscreen systems in high-rise buildings. Due to its unique stainless steel point design, the thermo console sets the highest standards in the area of thermal bridges and therefore easily reaches passive house level.
Depending on the design, there are two types of fixed points: Type 1 can be used up to approx. 20 kg/m² façade weight. Fixed point type 2 can also be used for solid and heavy façades, such as stone or ceramic. BEMO prepares U-value calculations for each project, as well as associated design and static calculations for the correct layout and anchoring of the substructure system.
THE BEMO-DOME FLEXIBLE FAÇADE SUBSTRUCTURE
Can be used for various building shapes and as rainscreen substructures
The BEMO-DOME substructure for rainscreen façades: It offers the right substructure solution for cylindrical or over 2-axis curved building shapes, as it can be used highly flexibly as a façade substructure.
The cladding options range from metallic trapezoidal and corrugated profiles to conical or free-form BEMO-MONRO panels. The system is characterised by its good load-bearing capacity, perfect tolerance compensation and simple on-site installation. It is also ideal as a rainscreen substructure.
Whether for a rear-ventilated wall construction or unventilated, the BEMO-DOME façade substructure meets all requirements – also as a rainscreen system.
To obtain a perfect result, we recommend the use of a 3-D scan for the on-site survey and execution design in 3-D for this substructure system.The standardised system always consists of the same components and varies between round and square tubes and different brackets, depending on the design. Fastening of the roof substructure is possible on all substrates and offers a tolerance compensation of +/- 45 mm.
360° SERVICE
From measurements to complex 3D planning
In BEMO’s own planning office, an expert team of technicians and engineers works on the implementation of your project – equipped with the latest 3D planning technology, some of which has been developed in-house. This team accompanies you in all project phases: After the initial consultation, it goes into the implementation of the desired design, the choice of materials and the design.
We carry out the first technical details and static preliminary measurements and take over the complete implementation and workshop planning. Cost estimates, technical improvements or variant calculations help you to improve your project economically. 3D measurements are the basis for our assembly-friendly, well-thought-out systems and for implementation in 3D planning. This is what a synergetic partnership with BEMO looks like.
INFORMATION
PROTECTION
Meet the highest fire protection requirements also for storey construction
PHYSICS
Optimal building physics and
statically safe façade system
THERMAL
Passive house level is possible due to TEKOFIX-A++ bracket without thermal bridging
DIVERSITY
Endless design possibilities
thanks to BEMO product diversity in the façade sector
BEARING
High Load-bearing Capacity Of The System
3D
High accuracy of fit through 3d measurement and planning
TOLERANCE
Offers a tolerance compensation of +/- 45mm
ROOF
Optimal substructure solution for rounded roof and facade surfaces
ASSEMBLY
Easy on-site assembly thanks to BEMO assembly planning
FEATURES
-Structurally Optimal -Shape Diversity -Colour Diversity -Surface Variety -Meets The Latest Fire Protection Requirements -No Moisture Damage To The Structure -Fire Class A -Passive House Certified -Extremely Load-bearing -Improves The U-value By Up To 75% -Very Low Chi Values
VARITY
The anchoring base of the rainscreen system (concrete, masonry, timber, etc.) can be different. There are virtually no limits to the design possibilities with the BEMO variety of cladding products.
DETAIL
Compliance with the most modern fire protection requirements and the highest level of moisture protection are guaranteed with the rear ventilated façade system. The rear ventilation level of the rainscreen system enables the moisture that diffuses through the component to be regularly removed, thus preventing moisture damage to the structure of the rainscreen façade.
CONSOLE
DESIGN
HOLE PATTERN
METAL
SURFACE
