Nola Ruta Modular Fencing System
Ruta Modular Fencing System
RUTA MODULAR FENCING SYSTEM
Design Lars Gunnars
The Ruta system creates tall fences and screens by joining the sections together.
Each section is designed with intersecting wooden strips that resemble trellises. The sections attach horizontally to form a straight line, or can combine at different heights to ‘step’ upwards on a slope or incline.
The freestanding posts can be ground-mounted, and attach to the sections on several sides. The flexibility they provide enables the system to create non-linear shapes if required.
INFORMATION
BRAND
Nola
DESIGNER
Lars Gunnars
PRODUCT TYPE
Modular Fencing System
APPEND TO PRODUCT NUMBER
- M for bed application in soil.
- N for attachment above ground.
ASSEMBLY AND PLACEMENT
-Supplied in sections. -With special fittings that are cast approx. 40 cm into the ground or bolted above ground. -In-ground -Cast in ground.
STANDARD COLOUR
NCS S 0502-Y (Vit)
SHAPES
Non-linear Shapes
PRODUCTION
Made in Sweden
CHARACTER
Flexible and room-creating screen system.
SURFACE MOUNT
Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.
VARIANTS
Both the trellis attachment and the foot fitting are included in each product.
SURFACE TREATMENTS
-Trellis : Frame planed 42x55 mm.
-Healed : Sawn 19x22 mm and 19x38 mm.
-Post : Ø 70 mm. Painted with white topcoat, NCS S 0502-Y.
-Fittings : hot-dip galvanized steel.
MAINTENANCE
-Hot-dip galvanized steel : Hot-dip galvanized can be touch-up painted with so-called "cold galvanizing".
-Electro Galvanized and Powder Coated Steel : Products that are electro-galvanized and powder-coated can be touch-up painted with alkyd paint.
-Top-glazed pine - water-based : Products in varnished pine must be maintained regularly with alkyd paint. Maintenance intervals approximately 1 time per year. Damage and cracks should be repaired immediately. Touch-up paints in spray packaging are available in standard colors to order
MATERIALS
-Steel : Nola uses high-quality steel of good strength in our products. Steel rusts if left untreated and must therefore be surface treated. For this we use two main methods for surface treatment of steel parts; electrogalvanizing and powder coating as well as hot-dip galvanizing.
-Hot-dip galvanized : Hot-dip galvanizing provides very strong protection against corrosion. The steel is dipped into a bath of hot liquid zinc. The zinc attaches and creates a surface coating on the steel part, which is then taken out of the bath and drained of excess zinc.
-Powder coating : Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
-Pine : Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.
-Water-based glaze : Varnishing of wood is done with a water-based varnish. A water-based paint that is kinder to the environment. Under normal use, the paint has a good wear resistance and long durability.