Mor Design Mille997 Sezioni Wallpaper
SEZIONI WALLPAPER
SEZIONI WALLPAPER
The “Sezioni” wallpaper is a part of “NaturalMood” collection, it is proposed in two colorings: WHITE/BLUE and WHITE/GREEN and it’s geared to personalize any kind of rooms delivering elegance and personality.
information
PRODUCTION
Made in Italy
PRODUCT TYPE
Wallpaper
BRAND
Mille997
CERTIFICATION
FSC' Certified
ROLL WIDTH
625 +/-1mm
THICKNESS
450 mm
FEATURES
Wall graphics Door coverage Interior Decoration
OUTDOOR USE
This non-woven wall covering is designed for indoor use only.
CATEGORIES
-Wallpaper -Collection, Les Enfants -Style -Children, Collaboration -Le Petit Momon
USE
The use is merely decorative and the product is not suitable for floors or environments in constant contact with water and / or chemical agents such as shower trays or swimming pools.
APPLICATIONS
- Indoor Wall Covering : -Durable and washable -Easy application.
- Wall graphics : -Easy application -Paste-the-wall
- No need to laminate
- FSC' Certified CE-marking acc EN 15102:2007 +41:2011 Flame Retardancy:
- B -sl. dO according to EN 1305-1 procedure
SUPPORT
The support utilized by Mille997 is made of vinyl and is suitable for covering different areas, not only residential but commercial as well, such as shops, offices, restaurants, hotels etc. The outstanding technical features of vinyl wall paper such as endurance, long life, fire resistance make it a high quality support.
CHARACTERISTICS
–Non-absorbent and odorless
-Washable with water and neutral detergents –Fireproof
–High dimensional stability during application and drying
–Easy fixing and removal of the product
care INSTRUCTIONS
WALL PAPER INSTALLING INSTRUCTIONS
- The surface to be pasted must be clean, smooth and dry, as well as even. Residue of old, crampling wallpaper and wall coverings must be removed. Use plaster to level imperfections and to fill holes.
- For a professional fixing operation you need: a bucket, a brush that doesn't lose bristles, a pair of scissors, spatula, ladder, sponge and clean rags, wallpapering table, long enough to to unroll the wall paper, a plumb line and a soft pencil. For optimal results, professionals should be contacted.
- Choose the type of paste according to the paper weight and prepare the paste in a clean bucket.
- Spread the paste on the back of the paper and let it dry for a few minutes. This will facilitate the fixing operation. The thicker the paper, the longer will be the drying time which, however shouldn't exceed a few minutes, usually 3 minutes are enough.
- The plumb line is absolutely necessary to make sure that the first sheet is fixed straight. You can also mark a straight vertical line on the wall to be used as a trace
- Paste the top of the panel first and slide the roll down vertically aligning with the plumb line.
- Stretch the sheet on the wall and smoothen it with a soft, neutral cloth, starting from the middle and moving softly outwards, first to one side then to the other, until it is completely fixed. Air bubbles can thus be avoided.
- Wall paper paste doesn't dry up quickly so you'll have enough time to fix the sheet properly
- Pay attention to the paste drying time to avoid bubbles and imperfections. Make sure that the entire panel is evenly smoothened.
- Excess paste residue can easily be cleaned off whilst still moist, by wiping down the panel with a wet natural sponge
- Air drafts in the room to be wallpapered should be avoided as a fast drying could be harmful. Wallpaper hanging should be done with closed windows.
- Once the first panel has been hanged, the following ones and especially those with repeatable patterns, should be carefully lined up.