Living Concrete Bolt Concrete Wall Panels
BOLT CONCRETE WALL PANELS
BOLT CONCRETE WALL PANELS
Our GRC Bolt wall panels are an innovative, powerful product which can be easily incorporated into a project either by gluing them directly onto the wall or using them as a replacement for existing wall types.
Not only are Bolt Concrete wall panels stronger and lighter than conventional panels, but they’re also good for use as ceiling panels and you can integrate them into any work or home environment, making them a flexible choice for the likes of architects and interior designers.
Our concrete wall panels can be used inside and outside, seamlessly helping to give you a contemporary feel for your home or work space. They also come pre-sealed and are backed by our in-house installation service available on request.
INFORMATION
BRAND
Living Concrete
INSTALLATION
Adhesive or bracket system
STANDARD SIZES
We offer a selection of standard panel sizes for you to choose from. These panels can also be cut to size to suit any space.
Minimum order 10m2.
- 1200 × 600 x 10 mm
WEIGHT
18kg/sq m x 10mm
USE
Internal and external
VERIFICATION OF THE AESTHETIC APPEARANCE
Please check and ensure that you are happy with the delivered product and there is no apparent visible defects. If any issues are detected do not start the installation and contact supplier immediately. No claims will be accepted after tiles have been installed.
CLEANING AND MAINTENCE
- Clean with neutral detergent
- Use wax maintainers or self-polishing cleaners
CONSIDERATIONS BEFORE INSTALLING GRC PANELS
-Keep packaged until installation -Do not force the panels over uneven surfaces -Always store horizontally -Do not place loads on the panels
-Level the sub-wall correctly before starting the installation (+/- 2 mm in 3 m) -Leave at least 5 mm for joints -GRC panels are not rectified, they can have variations of 0.6%
COMPOSITION
Cement - selected sand - specially designed additives and UV stable pigments
DELIVERY & PACKAGING
- Secure packaging for each panel
- Palletized delivery
- Installation data sheet
THICKNESS
21.6kg/sq m x 12mm thickness
DOWNLOAD
↓ Product Sheet
↓ Installation
STORAGE
- Keep in a dry, clean space in the original packaging
- Panels should be kept in a horizontal way
COLOR VARIATIONS
Because of its cementitious composition the colour of GRC panels may have different textures and tones within the same panel and / or in comparison to other panels in the same batch. Our colour selection chart is for reference use only and the colours are as close as possible to the original colours.
TOLLERANCES
- Thickness +/-5%
- Side straightness +/-0.5%
- Orthogonality +/-0.6%
- Planimetry +/-0.5%
- Length and width +/-0.6%
MECHANICAL PROPERTIES
- Yield strength (modulus of rupture) 5-8 mpa
- Tensile strength (modulus of rupture) 2-5 mpa
- Compressive strength 20-30 mpa
- Impact strength 5-10 KJ/m2
- Thermal expansion coefficient 20 x 10-6/°C
- Absorption Low water permeability
- Dorry wear 2.5 mm
TEXTURES & FINISHES
STANDARD TEXTURES
- Silk (smooth)
– Rough (pitted)
– Sandblasted
COLOURS
This selection of colours is for reference use only and are as similar as possible to the real colours. Because we work with only natural materials such as cement, sand and water, these may undergo changes in colour and tone.
