Living Concrete Brick Concrete Tiles
BRICK CONCRETE TILES
BRICK CONCRETE TILES
Our Brick Concrete Tiles are highly versatile and can be applied in interior and exterior settings with no issue. You’ll find that they can be deployed effectively in both small amounts and to cover an entire wall.
You can craft different patterns in a variety of colours and replace the existing ceramic tiles with ease. Alternatively, they can match with your wall cladding or concrete worktops.
Our tiles are made using a special combination of cement, sand and are specifically made with our leading blend of additives and UV stable pigments. The result is a concrete surface that is tough and functional.
We offer brick 3D tiles in a wealth of patterns and designs to maximise flexibility and all orders can take advantage of our bespoke installation service.
INFORMATION
BRAND
Living Concrete
CATEGORY
3D Tiles
WEIGHT
- Single tile = 0.63 kg
- Per m2 = 39 kg
APPLICATIONS
Internal/external Walls
USE
Internal and external
STORAGE
-Keep in a dry, clean space in the original packaging -Tiles should be kept in a horizontal way -Allow 24-48 hours to acclimatise before installation
SIZE
- Size: 250 x 65 mm
- m2 Area = 0.016
- No per m2 = 62
DOWNLOADS
↓ Product Sheet
↓ Installation
SUPPORT/BASE
- Secure, flat and free from moisture
- Panels do not solve existing damp problems
- There can be no rising or negative humidity
PROTECTION
- Water based sealer
- Acrylic wax
- Polifan Pu K14
WALL INSTALLATION
Polyurethane adhesive
TILES
3D Tiles
MATERIAL
GRC concrete
AVAILABLE TEXTURE
3
TEXTURES & FINISHES
SURFACE TEXTURES
- Silk (smooth)
– Rough (pitted)
– Sandblasted
COLOURS
This selection of colours is for reference use only and are as similar as possible to the real colours. Because we work with only natural materials such as cement, sand and water, these may undergo changes in colour and tone.
INSTALLATION
MAINTENANCE
- Apply sealer periodically
- Clean with fresh water and a neutral pH detergent
INSTALLATION GUIDE
- Living Concrete GRC 3D Decorative Tiles can be used on inner walls cladding. The tiles must be fixed to a stable, sturdy, and rigid surface.
- During the mounting, tiles may be machined with the use of tools suitable for concrete cutting.
- Invisible mounting system – gluing – with the use of back-expanding sleeve (ensures high strength of connections immediately after mounting).
(1) Gluing (with polyurethane or dispersion glue for mounting panels on small surfaces)
- Example of gluing with use of polyurethane glue
- Example of gluing with dispersion glue
(2) Invisible mounting system with use of the chemical anchor Anchoring (with chemical anchors – a sleeve is permanently fixed to the inner surface of the panel; then an appropriate rod is inserted into each of them, next chemical anchor is injected into the holes, and the panel is fixed).
GRC Concrete technical data
| PARAMETER | UNIT | SPRAY METHOD | CASTED MIX METHOD | CONVENTIONAL CONCRETE |
|---|---|---|---|---|
| Glass fiber content in concrete mix | % | 5 | 3 | 0 |
| Dry density | g/cm3 | 1.8-2.2 | 1.8-2.0 | 2.2-2.5 |
| Thermal conductivity | W/m*K | 0.9-1.5 | 0.9-1.5 | 1.0-1.6 |
| Thermal expansion | X10 -6/°C | 7-12 | 7-12 | 10-14 |
| Frost resistance | Cycle | 150 | 150 | <100 |
| Attenuation (flat 9,3 mm panel) | dB | 31.2 | 31.2 | 31.2 |
| Tension | - | - | - | - |
| Breaking stress (UTS) | MPa | 8-11 | 4-7 | 1-5 |
| Limit of proportionality (LOP) | MPa | 5-7 | 4-6 | 1-4 |
| Breaking stress | MPa | 20-30 | 10-14 | 3-6 |
| Limit of proportionality (LOP | MPa | 7-13 | 5-8 | 2-3 |
| Young’s modulus | GPa | 15-25 | 13-21 | 27-35 |
| Shear | Mpa | 8-11 | 4-7 | 3-5 |
| Compressive strength | Mpa | 50-80 | 40-60 | 15-60 |
| Impact strength | kJ/m2 | 10-25 | 10-15 | 0.05 |
| Modulus of elasticity | GPa | 10-20 | 10-20 | 20-40 |
| Drying shrinkage | % | 0.6-1.2 | 0.1-0.2 | 0.8-1.8 |