Living Concrete Corner Concrete Wall Panels
Concrete Corner Concrete Wall Panels
CONCRETE CORNER CONCRETE WALL PANELS
These GRC wall panels are built to add a unique dimension and interest to a wall – they’re made with lifted corners to do so. You can use them with other types of wall features to either make uniform walls throughout a space or create a feature wall as needed.
The great thing about a wall like this is that you can use it both indoors and outdoors to suit your exact specifications – it’s a flexible design.We have done our best to ensure that our corner panels are easy to install – you can glue them straight onto existing walls or use them in projects as an alternative to other wood types.
As part of our bespoke service, we offer a range of finishes and surface textures for clients to choose from. Furthermore, we’ve gone above and beyond to offer an in-house installation service and a hydrophobic pre-sealant.
INFORMATION
FINISH
Finishes: Unsealed or a choice or Matt, Satin or Gloss (we recommend sealing to limit staining). Give our team a call to discuss your requirements.
BRAND
Living Concrete
SIDE STRAIGHTNESS
+/-0.5%
THICKNESS
+/-5%
ORTHOGONALITY
+/-0.6%
PLANIMETRY
+/-0.5%
USE
-Internal -External
WEIGHT
8kg/m2/10mm
INSTALLATION
-Adhesive -Bracket System
GRC CONCRETE FEATURES
- Suitable for wall installation both indoor and outdoor
- Large format panels with superior strength
- High mechanical resistance and UV stability
- Available in different textures and colours
DELIVERY AND PACKAGING
- Secure packaging for each tile
- Palletised delivery
- Installation data sheet
DOWNLOADS
↓ Product Pdf
↓ Installation Guide PDF
COLOUR VARIATIONS
Because of its cementitious composition the colour of GRC panels may have different textures and tones within the same panel and / or in comparison to other panels in the same batch. Our colour selection chart is for reference use only and the colours are as close as possible to the original colours.
COMPOSITION
- Cement
- Selected sand
- Specially designed additives and UV stable pigments
- The GRC Ultra High Performance Concrete panels stand out because of their versatility
- Durability and high hardness
- Making them suitable for all types of applications.
MECHANICAL PROPERTIES
- Yield strength (modulus of rupture): 5-8 mpa
- Tensile strength (modulus of rupture): 2-5 mpa
- Compressive strength: 20-30 mpa
- Impact strength: 5-10 KJ/m2
- Thermal expansion coefficient: 20 x 10-6/°C
- Absorption: Low water permeability
- Dorry wear: 2.5 mm
VERIFICATION OF THE AESTHETIC APPEARANCE
Please check and ensure that you are happy with the delivered product and there are no apparent visible defects. If any issues are detected do not start the installation and contact supplier immediately. No claims will be accepted after tiles have been installed.
CLEANING & MAINTENANCE
- Clean with fresh water and a neutral pH detergent
- Do not use any aggressive cleaning agents or any other chemicals that are reactive to concrete or sealant
- To clean specific stains do not use abrasive materials
- Do not leave standing water on the surface
- Do not leave stains to dry, as they may permanently stain the surface
- For outdoor apply sealant periodically depending on usage
- Sweep or vacuum the surface regularly to remove all dirt and dust
INSTALLATION GUIDE PDF
INSTALLATION GUIDE – WALLS
- Base: solid flat surface
- There can be no rising or negative humidity
- Verify that the base wall is levelled (+/-2 mm in 3 meters)
- Allow for the perimeter joints and joints against objects from the base
STORAGE
- Panels should be kept in a horizontal way
- Do not leave the panels in a vertical or inclined position or leaning against any surface
- Keep in a dry, clean space in the original packaging
DIRECT WALL INSTALLATION WITH ADHESIVE
-Bracket system -Spirit Level -Sealer -Screws and anchors -Tape measure -Cradle Caulking Ladder/Scaffold tower/ -Access platform -Angle grinder Sandpaper -Paint Tray Microfibre roller Safety equipment
DIRECT WALL INSTALLATION USING INVISIBLE FIXINGS
-Spirit Level -Drill /driver -Prime, sealer and Polyurethane / Epoxy adhesive -Screws, anchors and concrete or metal caps -Tape measure -Cradle Caulking Gun -Ladder /Scaffold tower/ Access platform -Tile Spacers -Angle grinder -Sandpaper -Paint Tray
STEP BY STEP MANUAL INSTALLATION
- The wall should be levelled (+/-2 mm
in 2 meters)
- Sand the wall to remove any loose elements
- The base has to be firm. Verify with a sharp tool
- Define the way of installation according to the aesthetic wanted
- Install bracket system
- Begin the installation of the panels from the bottom up depending on design
STEP BY STEP MANUAL INSTALLATION
- The wall should be levelled (+/-2 mm in 2 meters)
- Sand the wall to remove any loose elements
- Apply primer § The base has to be firm. Verify with a sharp tool
- Define the way of installation according to the aesthetic wanted
- Begin the installation of the panels from the bottom up
- Apply adhesive as per manufacturer’s recommendations
COLOR RANGE
SURFACE TEXTURES / FINISHES
-Silk (Smooth) –Polished –Rough (Pitted) –Timber Planked
COLORS
The colours in our colour selection chart are for reference use only and are as close as possible to the original colours. Give our team a call and we’ll work with you to create the perfect colour to suit your designs.
