Janson Bridging Panel Bridge
PANEL BRIDGE
PANEL BRIDGE
The Janson Panel Bridge system (JPB) was designed for temporary and permanent installation where a span of up to 85 metres is required for work or general traffic. The system is built up from modular standard panels.
The separate parts are designed in a way that they can be put together with using light tools, so that a panel bridge can be installed in places that are inaccessible to heavy-duty vehicles and heavy cranes. The bridge system can be expanded with towers to allow vertical height differences.
Janson panel bridges were designed with any eye for assembly with the use of relatively small tools and small cranes. It is also possible to set up this bridge system horizontally in places where a crane has no excess at all.
The bridge sections can be pre-assembled as separate units or can be transported partly pre-assembled to the destination of the bridge.
INFORMATION
BRABD
Janson Bridging
PRODUCT TYPE
Bridge
SINGLE SPANS
Single spans up to 85 meter.
TOPPING
Anti skit layer
MAXIMUM FREE SPAN
85m
MODULAR FIELD LENGTH
3,048m (10ft)
GUARDRAIL
Traffic, pedestrian
PRODUCTION
Made In Netherlands
ROAD SURFACE WIDTH
3.2, 4.2, 7.4m
SUITABLE
Suitable for public infrastructure or construction site traffic.
DECK HEIGHT INCLUDING SUPPORT
From 0.85m
OPTION
Option of hinged and continuous coupling.
GUARDRAILS
Guardrails and pedestrian footwalk optional.
ASSEMBY
Assemby with minimal tools and equipment.
USE
Janson panel bridges were designed with any eye for assembly with the use of relatively small tools and small cranes.
