Emu Shade Pro Sunshade 3x3
SHADE PRO SUNSHADE 3X3
SHADE PRO SUNSHADE 3X3DE PRO
Sunshade 3x3 / cod.995+929/B8N+999
The Shade Pro Sunshade has an aluminum structure and an acrylic fabric cloth.
The opening and closing of the Sunshade is facilitated by the aid of a gas spring which, by acting on an appropriate system of levers, reduces the force required for opening and closing operations.
The dimensioning and the levers made allow the Sunshade to close easily without the need to move tables, as well as the possibility of rotating it on the horizontal plane.
Shade Pro is also equipped with a lighting system consisting of 4 LED bars, a remote control and an electrical panel
The battery powered remote control has the following buttons: on, off, three preset light intensities, choice between warm light and cold light (Kelvin degrees).
INFORMATION
COLLECTION
Shade Pro
POLE
9X13.5 CM
COVER
Yes
WEIGHT
87.5 Kg
PACKED DIMENSIONS
- Dimensions 1 : 308x46x60 cm
- Dimensions 2 : 128x66x26 cm
DIMENSIONS
- Width: 303 cm
- Depth: 323 cm
- Height: 288 cm
CODE
995+929/b8n+999
TYPOLOGY
Side Pole
BRAND
Emu
PRODUCTION
Made in Italy
MATERIAL
Aluminium - Synthetic Fabrics
BOX MATERIAL
Polyethylene bag and cardboard
SUNSHADE
3x3
COVER TYPE
Fc/981
PIECES FOR PACK
1
LIGHTINING
LED lights
MAINTENANCE - ALUMINIUM
To keep the product in good condition for a long time, we recommend cleaning it regularly; more often in very damp locations with a marine climate.
It is recommended to clean the surfaces using a soft cloth with water or mild detergents. Prolonged and continuous exposure to intense UV radiation or very low temperatures can affect the initial characteristics of the coloured coating, which is made from polyester. We recommend cleaning and storing the products in sheltered places during prolonged periods of non-use and during the winter.
COLORS
MAINTENANCE - SYNTHETIC FABRICS
Avoid prolonged contact with greasy substances and/or dyes or colorants that could be absorbed by the covering material and cause permanent stains, as well as deteriorating the yarn structure. In the case of use near the sea or swimming pools, periodic washing is recommended. Frequent washing: follow the specific instructions given on the label for each material.
Use water and non-abrasive, colorless, neutral PH liquid detergents. If necessary, allow the detergent to act for a few minutes. Rinse thoroughly with water at a temperature not higher than 30°C (86°F). If pressure cleaning devices are used, keep the tip of the nozzle at a distance of at least 60-70 cm from the surface of the product.
If necessary, repeat the operation. Do not use abrasive sponges to remove stains and do not treat with bleach or chlorine.