Falper Eccentrico Bathroom washbasin

CERTIFICATIONS

Certified for USA, Canada and Europe :

–Greenguard Gold (BIO origin and volatile substance emission certified by Ul) -Optional drawers in wood with dividers, available in all matt and wood finishes –Available with Cristalplant® Bio Active –Bases with 45° fronts and sides

VERSION

Bio Active version with virucidal, antifungal and self-cleaning properties thanks to a new titanium dioxide-based formulation Virucidal activity is also active against SARS-CoV-2 after a contact time of 30′ and 60”.

CRISTALPLANT BIO ACTIVE® FEATURES

– Biobased (30% GMO-free plant resins)
– Recyclable and reusable as an inert material
– Cigarette burns easily restored
– Resistance to thermal shock (UNI 9429:1989 no defect)
– Scratches and cracks easily restored
– Stains easily restored
– Hypoallergenic and non-toxic

WOOD FINISHING

Clean with a damp cloth; for deeper-down cleaning use solvent-free glass cleaning products and dry thoroughly with a soft cloth. Do not use abrasive products or products containing chlorine, solvents or acetone. Important: paints used for wood are waterproofed, anti-yellowing and should not be scratched or subjected to high temperatures. Do not use furniture wax. Remember that even after finishing, wood behaves like a natural material and remains sensitive to heat and humidity. Avoid standing water by drying wooden parts after each use.

MARBLE

-Clean the washbasin at least once a week using a sponge or a soft cloth and a neutral detergent suitable for stone surfaces. -Remove standing water that may form on the washbasin surface as stagnation over a long time may cause limescale build-up. -Remove any aggressive substance if accidentally poured onto the surface and in any case before any is absorbed by the stone. The protective sealant we apply on all our surfaces creates a temporary barrier to limit the absorption of liquids, however prompt and effective removal of staining agents is the best remedy. Products that may stain the surface include coffee, tea, red wine, nail solvents, self-tanning lotions and hair dyes. -Always avoid products which contain acids, bleach, alcohol, especially aggressive products, including all specific ones for limescale removal and abrasive products. -One of the main properties of natural stone is its resistance to wear, therefore soft brushes can be used without fear of causing damage. However, avoid using abrasive sponges or steel scrubbers. For especially stubborn stains, we recommend using the product fIIA PS87.

CRISTALPLANT BIO ACTIVE®

Clean with soapy water or common detergents to remove most of the stains and dirt that can deposit on the surface using a soft sponge or microfiber cloth. In particular, gel, liquid or spray detergents used with a soft cloth are recommended, taking care to rinse and dry the surface well to avoid the accumulation of dirt and limescale. For detergents whose potential aggressiveness is unknown, it is advisable to carry out an application test in a small area that is not visible before using the product. After cleaning, rinse immediately and dry the surface well to avoid the formation of halos.

Avoid thermal stress of the product: do not use boiling water (above 55 ° C-130 ° F) and do not pour hot oils and liquids on the surface. Do not place hot objects, cigarettes or open flames on the surface. Do not use direct hot steam to clean the surface.