Antoniolupi Bloom Washbasin
BLOOM WASHBASIN
BLOOM WASHBASIN
Designed By Daniel Debiasi E Federico Sandri
Thin and foldable like a sheet of paper, cozy and deep but at the same time light and delicate.
Bloom is the top mount basin with an original shape that comes from a rigorous geometry but softens emphasizing the subtlety of the material and the thickness of the border that seems to cancel out. The soft lines that open upwards invite the use of the sink and accompany the gestures, facilitating the experience, while the base remains important and well anchored to the top.
The 4 cuts in the corners refer to the image of a box that opens and becomes the hallmark of the collection.
Simple details that are transformed into contemporary decor and contribute to the transposition of the material's meaning. In fact, the sheet seems to tear off because subjected to the force of the water but in reality the casing is resistant, solid and ensures a great capacity to the basin. A top mount sink that emphasizes the subtlety of the material, considering it as a molded sheet in a soft but geometrically rigorous way.
The four cuts on the ends emphasize its lightness, giving it an almost handmade character. The soft curves, below, confer instead visual solidity at the base of the object.
information
BRAND
Antoniolupi
COLLECTION
Bloom
PRODUCT TYPE
Washbasin
ARTICLE
Bloom
DATA
Rectangular top mount Flumood sink complete with drain pipe fitting and open plug.
NET WEIGHT
11 Kg
USE
Bathroom
OVERFLOW
No
PACKING DIMENSIONS
70 x 48 x 23 cm
DIMENSIONS
61 x 41 x 15.5 cm
MATERIALS USED
-Colormood : It is a material composed for the most part of aluminum hydroxide and synthetic resins with a low styrene content. Mass-colored, the material is completed with the application of a protective coat that gives the material an extra matt finish.
-Flumood® : FLUMOOD® is a material composed for the most part from aluminum hydroxide and synthetic resins with low styrene content.
MATERIAL
Flumood or Colormood
DESIGNER
Daniel Debiasi E Federico Sandri
COLOURS
ALL COLOURS
MAINTENANCE INSTRUCTIONS
FLUMOOD
-White Flumood Cleaning : Clean with abrasive cleaners. For cleaning it is particularly recommended the liquid detergent Art. Cleansurface to be used with an abrasive sponge like SCOTCH BRITE®.Being a homogeneous material throughout its thickness, it can be restored with buffer pads and can therefore be used to remove surface scratches, cigarette burns and stubborn stains, bring back the surface to its original beauty. After cleaning thoroughly rinse with water. Avoid products containing ammonia. -Toxicity : The product does not appear toxic to humans, animals or to the environment. -Ecology : Only discard in appropriate disposals according to rules and regulations in your area.
COLORMOOD
-Cleaning Colormood : For cleaning we recommend the liquid detergent Art. CLEANSURFACE. When finished cleaning it is recommended to rinse thoroughly. Do not use water at temperatures above 60°. Avoid using and/or contact with products containing sodium hydroxide (eg. caustic soda, sink plunger, toilet plunger) as they can discolor the material as illustrated in the attached data performed by laboratory tests. Colored detergents should not be left on the surface, but should be removed immediately. -P.S. : in the case of scratches or burns do not sand the product. For an assessment of the damage, contact the company. -Toxicity : The product does not appear toxic to humans, animals or to the environment. -Ecology : Only discard in appropriate disposals according to rules and regulations in your area.
