Falper Viaveneto Double Washbasin Top

DOWNLOADS

↓ Technical Data
↓ Technical Drawing
↓ Autocad 2D

STRUCTURE

Unit with matt lacquered MDF fronts and sides with water-based paints on styrene-free polyester base and veneered Birch Plywood AW 100 with open pore and water-based procedure painted wood, waterproofed ennobled exclusive matt grey Idropan V 100 structure.

CERTIFIED

Viaveneto collection with Matt coloured Ceramilux SSL, matt CRISTALPLANT® BIOBASED washbasins with certified automotive derived paint UNI EN 14688 – 2018 certified glossy lacquered and frosted glass with fingerprint resistant treatment

CHARACTERISTICS OF GLASS TOP

–Made with extra clear safety glass, with heat moulding procedure in the case of integrated washbasins. Tops then undergo a relaxation and internal cold colouring process with water-based varnishes. –Visible surfaces of frosted glass tops are further treated with a surface sanding and formatting process, followed by the application of nanotechnological paints for permanent stain and fingerprint resistance.

INSTALLATION

–Installation-ready for STANDARD drain-trap included –Installation-ready for VIEGA (item 52K) drain-trap included upon request -Drawer interiors made of Waterproofed ennobled Idropan V100; exclusive grey aluminium sides

FINISHES

–Unit interiors with Matt Exclusive Grey finishing –Construction with sides with side closure of groove handle
–Fronts with groove handle –Optional wooden drawers with dividers, available in all matt and wood finishings.
–Fittings hole included upon request –Drain plug cover with chrome finishing. -Blum Legrabox series drawers with integrated stabilisers (over W 90 cm) and soft close. Exclusive Grey finishing

WASHBASIN COLORS

UNIT COLORS

LACQUERED PRODUCTS

Clean with a damp cloth; for more thorough cleaning, add liquid detergents to water, rinse with water and dry with a soft cloth. Do not use abrasive products or products containing chlorine or acetone.

WOOD FINISHING

Clean with a damp cloth; for deeper-down cleaning use solvent-free glass cleaning products and dry thoroughly with a soft cloth. Do not use abrasive products or products containing chlorine, solvents or acetone. Important: paints used for wood are waterproofed, anti-yellowing and should not be scratched or subjected to high temperatures. Do not use furniture wax. Remember that even after finishing, wood behaves like a natural material and remains sensitive to heat and humidity. Avoid standing water by drying wooden parts after each use.

GLASS

For routine cleaning use normal glass cleaning products or Ph Neutral detergents, being careful to dry well. Do not use paper wool, abrasive sponges, alcohol and detergents that may leave marks. Clean glasses with cotton or synthetic cloths that do not leave residues on glass. The surface of the top is highly resistant to acids, but the internal varnish could be attacked by prolonged contact with acid or base substances. We do not recommend using acid products (anti-lime scale) or base products (bleach, caustic soda). We also recommend avoiding abrupt temperature changes (thermal stress) and not exceeding an operating temperature of 60°.