Falper Mirror Straight edge square mirror W60-160cm
MIRROR STRAIGHT EDGE SQUARE MIRROR W60-160CM
MIRROR STRAIGHT EDGE SQUARE MIRROR W60-160CM
Designed by Falper Studio
Square bathroom mirror with steel straight edge with 2.5cm thickness. Height from 60cm to 75cm, width from 60cm to 160cm. Made-to-measure mirrors available up to 1.5 sqm.
INFORMATION
BRAND
Falper
DESIGNER
Falper Studio
PRODUCT TYPE
Square bathroom mirror
COMPOSITE MATERIAL STRUCTURE
Composite material structure with stainless steel sides
MIRROR WITH THICKNESS
Traight edge square glass and stainless steel mirror with thickness of 2.5cm
DIMENSIONS
- Width : 60, 80, 100, 120, 140, 160 cm
- Height : 60 - 75cm
- Depth : 2 cm
CHARACTERISTICS
New generation, compact and lightweight composite material, 100% recyclable and moisture resistant.
DETAIL
- Stainless steel hooks
– Glossy stainless steel edge
– 4mm straight edge mirrors, eco-friendly as in compliance with the European RoHS Directive (2002/95/EC) with high corrosion resistance.
– Mirrors available in Smoked version with surcharge
– Made-to-measure mirrors available up to 1.5 sqm
FEATURES
FEATURES
- Lighting system “OLED” 6Wx300 lumens.
- LED and OLED lights with CRI index > 80
- Dimmable Make Up light from 3000 to 4000 K CRI > 80
- Customisation available on mirrors
system “OLED”
6Wx300
lumens.
OLED lights
with
CRI index > 80
Make Up
light from
3000 to 4000 K CRI > 80
on
mirrors
CARE & MAINTENANCE
TITANIUM FINISH STAINLESS STEEL
Use normal neutral type and delicate detergents for household cleaning to be applied with a non-abrasive sponge or cloth, taking care not to rub against the satin-finish grain if present. Rinse with warm water and dry with a non-abrasive dry cloth. Do not use any acid detergent, solvent or aggressive substance. Especially avoid using products for cleaning stainless steel (like Sidol or Smac) because their characteristic function of removing chromium oxide from the surface of untreated glossy steel would remove the oxide that generates the titanium surface finish effect.
GLASS
For routine cleaning use normal glass cleaning products or Ph Neutral detergents, being careful to dry well. Do not use paper wool, abrasive sponges, alcohol and detergents that may leave marks. Clean glasses with cotton or synthetic cloths that do not leave residues on glass. The surface of the top is highly resistant to acids, but the internal varnish could be attacked by prolonged contact with acid or base substances. We do not recommend using acid products (anti-lime scale) or base products (bleach, caustic soda). We also recommend avoiding abrupt temperature changes (thermal stress) and not exceeding an operating temperature of 60°.